Skip to Content

Tu tienda de energía solar

Encuentra los módulos solares, los inversores, las baterías y muchos más accesorios que buscabas

Batteries

Baterías

Las baterías son el método de acumulación de energía fotovoltaica más viable por el momento. La solución perfecta para el almacenamiento de la energía generada por los paneles durante el día y poder emplearla durante la noche, durante un periodo de mal tiempo, o incluso en caso de blackout.


Necesarias en soluciones aisladas y complementarias, pero muchas veces recomendables, en soluciones de autoconsumo energético con apoyo de la red, o como lo hacemos llamar en Plug & Play. Energy, "Autoconsumo mejorado". Y si tienes dudas no te preocupes, porque proporcionamos el mejor servicio técnico.

Odoo • Texto e imagen
Sigenergy SigenStor BAT 6 (6kWh) (11130018)
• Capacity: 6kWh.
• Modular and stackable: Up to 6 modules per stack, scalable up to 36kWh.
• Quick installation: Self-pluggable connectors, commissioning in minutes.
• Smart integration: Compatible with SigenStor EC inverters and mySigen app.
Sigenergy SigenStor BAT 10 (9kWh) (11130012)
• Capacity: 9kWh, full discharge for maximum efficiency.
• Modular and stackable: Up to 6 modules per stack, scalable to 54kWh.
• Quick installation: Self-pluggable connectors, commissioning in minutes.
• Smart integration: Compatible with SigenStor EC inverters and mySigen app.
Sigenergy SigenStack BAT 12 (12kWh) (11130014)
• High density: 12kWh/module, up to 253kWh/system
• Safety: IP66, fire suppression and thermal cell control
• Compatible and scalable: CAN integration with Sigenergy inverters, 4‑21 modules
• Quick installation: Floor mounting, air cooling, simple commissioning
Dyness DL5.0C (5kWh)
Product model: DL5.0C (5kWh)
Battery type: LiFePO4
Rated battery power: 5 kWh
Protection grade: IP20
Expansion: Up to 50 units in parallel
Life cycle: ≥8000 cycles / 7 years
Net weight: 49.9kg
Atmoce MS-7K-U battery (7kWh) (81041001)
Atmoce MS-7K-U Lithium Battery (7kWh) Universal AC-Coupling storage solution suitable for outdoors (IP66). Compatible with any inverter (single-phase/three-phase) to hybridize new or existing installations. Total optimization with Atmoce microinverters.
Guarantee: 15 years.
Capacity: 7 kWh.
Sigenergy SigenStack Cover (11180003)
The SigenStack cover serves as a protection for the battery modules inside the tower. Its main function is to safeguard the modules from external elements such as dust, humidity, and adverse environmental conditions, helping to prolong the useful life of the system and maintain the safety of the installation.
Sigenergy SigenStor BAT 5 (5kWh) (11130002)
• Capacity: 5kWh.
• Modular and stackable: Up to 6 modules per stack, scalable up to 30kWh.
• Quick installation: Self-pluggable connectors, commissioning in minutes.
• Smart integration: Compatible with SigenStor EC inverters and mySigen app.
Only 2 Units left in stock.
Sigenergy SigenStor BC (incluye base) (11180011)
BMS module for Sigenstor Bat 5, 6, 8 and 10 kWh combined with SP2 or TP2
Sigenergy SigenStack Base SUB-0.5C (11180005)
• SUB-0.5C Base: Supports charging/discharging up to 0.5C.
• Modular and stackable: Supports up to 7 battery modules per stack.
• IP66 protection: Dust and water resistant.
Sigenergy SigenStack Base MAIN-0,5C (11180002)
• Modular compatibility: Supports up to 5 SigenStack 0.5C modules
• Stackable design: Compact (770 × 195 × 363mm) and easy to install
• Integrated connectivity: Power and communication interfaces included
• IP66 rating: Dust and water resistant
Brackets Dyness DL5.0C
Dyness DL5.0C Brackets
Sigenergy SigenStack Base SUB-1C (11180007)
• SUB-1C Base: Supports charging/discharging up to 1C.
• Modular and stackable: Supports up to 7 battery modules per stack.
• IP66 protection: Dust and water resistant.
Sigenergy SigenStack BC M2-1C-BST (11140002)
SigenStack Battery Controller M1 - 1C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.
Only 9 Units left in stock.
Sigenergy SigenStack Base MAIN-1C (11180006)
• SigenStack Tower Master Controller – coordinates and manages all battery modules
• Optimizes charging, discharging and balance between modules for efficiency and useful life
• Maximum capacity managed per tower: 252kWh
Only 2 Units left in stock.
Pylontech US3000 48V (3.6 kWh)
Voltage 48 V (45….53.5 Vdc)
Available power 90% (3.2kW)
Recommended discharge 37 A (1.7 kW)
Maximum discharge 74 A (3.5 kW)
Can-Bus and RS485 connection
Compatible with Victron and Solis
> 6000 life cycles @ 25ºC (15 years)
Dimensions: 442mm x 420mm x 132mm
Weight: 32kg.

Llega en 1 semana!

TCC-CAN Ultra 175
The TCC-CAN control module for the eBick Ultra 175 modular battery from Cegasa.
The BMS, through CAN communication, allows you to send the most relevant battery data such as SOC, temperature, alarms, current and voltage during charging and discharging, among others. In addition, with the eViewer App, through a Bluetooth connection, it allows you to view the module parameters such as battery SOC, cycles and bus voltage, among others.
Only 1 Units left in stock.
Solis Dyness 50kW/100kWh (S6-EH3P50K-H(21A))
Solution model: Solis + Dyness 50kW/100kWh
Inverter: Solis S6-EH3P50K-H
Inverter rated power: 50 kW three-phase
Recommended PV power: Up to 100 kW
Battery: Dyness BF100
Useful capacity: 100 kWh
Battery technology: LiFePO4
Application: Commercial/industrial storage.
Sigenergy SigenStack BC M2-0.5C (11140001)
SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.
Only 6 Units left in stock.