Maximum Voltage: 1500 V
Cable diameter: 5.5 - 9mm
Cable Section: 4 -6 mm2

Maximum Voltage: 1500 V
Cable diameter: 5.5 - 9mm
Cable Section: 4 -6 mm2

• Maximum precision of 1% in power measurement for exact control of consumption, generation and energy optimization
• Plug & play integration with Sigenergy systems via Modbus, without additional configuration
• Real-time monitoring with data refresh every 100ms for instant response
• Versatile installation: direct connection up to 100A or with external current transformers (CT)

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates the PV inverter, battery power conversion system (PCS), EV DC charger for electric vehicles, battery pack and energy management system (EMS).

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates PV inverter, battery power conversion system (PCS), DC EV charger for electric vehicles, battery pack and energy management system (EMS).

• 1% accuracy in power detection for exact control
• 100A single-phase direct connection with built-in CT
• Modbus RTU communication via RS485
• Supports export/import limitations and prepared for AI evolution

OPEN Transformer 150/5
Section up to 95 mm2

Sigen Sensor TP-DH-Direct (1426000003)

Openable transformers measuring 1000/5

Modbus three-phase current meter

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

Photovoltaic protection panel for 2 inputs + 2 outputs. 1000Vdc, 15A per input, with fuse and fuse base. Enclosure of 12 modules in ABS. MC4 connectors.

Openable toroidal IAP 1000/5

Openable transformers measuring 1500/5

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

A power meter transmits the power measurement quantity to the SolarLog for analysis. It serves as a consumption meter, showing a comparison of the power produced and consumed. It can be configured to operate with the SolarLog in three different modes:
- Measurement of energy consumption for optimal use of the generated power.
- Measure the total amount of energy that has been poured into the grid.
- Measurement of energy production of inverters that are not managed directly by SolarLog.

AC current meter

Bidirectional three-phase meter.
Rated voltage 230 V/400 V
Frequency 50 Hz/±5%
Rated current/limit per phase conductor 5 A/63 A (>63 A combined with external current transformers)
Starting current <25mA
Connection section 10 mm² to 16 mm² 1) (for 63 A protection)

Victron 275A disconnector

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / U AC1.0 / 1.0 kV DC 1.5 / 1.5 kV
Weather and UV resistance