What data does a Clenergy enquiry need?
Drawings, location, roof, supporting structure, module dimensions, layout, loads, permitted fixings and waterproofing constraints.
Clenergy · B2B
Clenergy mounting systems for photovoltaic installations
Clenergy mounting systems organised by roof and application for professional projects based on site, module, load and fixing data.
View catalogueTechnical FAQMounting is designed for each site
Plug & Play Energy organises the Clenergy range by roof type to simplify enquiries and quotations. Final selection requires checking support, geometry, loads, fixings, corrosion, module and regulations.
A bill of materials must not be closed from a photograph or generic roof type. Drawings, location, roof condition, supporting structure, module layout and fixing conditions are required.
Criteria to verify
- Location, wind, snow, height and environment.
- Roof material, condition and supporting structure.
- Module dimensions, weight and fixing zones.
- Layout, tilt, spacing and access aisles.
- Fixings, torque values and material compatibility.
- Drainage, corrosion, earthing and maintenance.
PV-ezRack · Easy Click
See Easy Click in action
In under two minutes, see why Clenergy mounting is fast, solid and straightforward.
Official Clenergy video for SolarRoof Pro 2.0 in Europe.
Systems by roof type
Pitched roof
Tile, slate, trapezoidal sheet, sandwich panel or fibre cement require different fixings and checks.
Flat roof
Ballasted, mechanically fixed or hybrid solutions are compared through loads, waterproofing, geometry and load capacity.
Metal roof
Standing seam, minirail or corrugated sheet must match the actual profile, thickness, material and fixing system.
Published professional range
Application-based navigation helps locate families and components, but the final list must be validated as a complete system.
View full category
Frequently asked technical questions
Can mounting be chosen only from the roof type?
No. Support, material, thicknesses, geometry, loads, module, fixings, corrosion and project requirements also matter.
When is ballast or mechanical fixing used?
It depends on load capacity, wind, waterproofing, movement, geometry and project criteria. The complete solution must be calculated.
What must be checked on a standing seam?
Seam geometry and material, thickness, support strength, clamp compatibility, loads and roof manufacturer requirements.
Why are torque values important?
Incorrect torque can compromise fixing, module or warranty. Values and tools from current documentation must be used.
Editorial and technical review: Plug & Play Energy team · 17 August 2026. Official manufacturer source. Specifications, warranties and compatibility must be checked for the exact reference and current documentation.