1000Vdc, 15A per input, with
fuse and fuse base + surges 40kA 1000vdc.
Enclosure of 3x18 modules. Box without drilling and with
stuffing box inside.

Differential Switch. RCCB 2P 40A 30mA type A (VE Charger suggestion)

[MD00138] BV2M-40/240 - Single-phase surge protectors Type 2
• Maximum service voltage Uc = 275 V. Protection level [N-T] Up = 1.2 kV. Maximum discharge current (8/20) Imax = 40 kA. Mounting on DIN rail, pluggable, width 1 module (18mm).

Measurements (H×W×D): 90×18×68 mm
Weight: 0.13kg
Technical source: MD Technological Equipment - BV2M-40/240 technical sheet

Photovoltaic protection panel with 7 inputs and 7 outputs of 1000vdc with 16A disconnector, 20A fuses in 10x38 and type II surge protection 40kA, 1000vdc. per string, double-insulated polyester hybrid envelope and transparent polycarbonate cover with 720x540x201 gasket, with cable gland, assembled and pre-wired.

Protection box
photovoltaic with 16 inputs and 16 outputs, mounted on a plate
800x600x300mm IP66 polyester cabinet with door
opaque Composed of 32 fuse bases and fuses
10x38 15A 1kV + surge protection BF3-
40/1000vdc with bulkhead, assembled and pre-wired.

Custom photovoltaic protection panel with 9 inputs of which 3 are double and 6 outputs with disconnector, fuse bases and 10x38 1000vdc 16A fuses in IDE IP65 3x18 enclosure in ABS, with wall grommets and cable gland for ground, assembled and pre-wired.

Combiner type photovoltaic protection panel

Custom-made with 13 inputs and 1 output with 1500 VDC 400A disconnector, + fuse bases and 14x85 1500vdc 16A fuses in IP66 polyester cabinet 747x536x300mm with opaque door, with wall grommet and cable gland for ground, assembled and pre-wired.

Electric vehicle charging protection panel according to ITC-BT-52.
2 Poles, 32A, POP 50:550 permanent and transient overvoltage protection.
Resettable automatic

Coplanar kit for 2 vertically installed modules of 60 and 72 cells, with a frame between 30 and 42 mm.

The kit includes:

Light Guide 2.4 m
OneEnd final plate set
OneMid center plate set
Protection cap for Light guide
Self-tapping rod set M10x250

SPF 1/1 string, MC4 type connector, protection fuses, 40kA 8/20, cartridge (1000Vdc), box with 6 IP65 modules

SPF 2/1-40/1000/15 (122) - Photovoltaic protection panel
for 2 inputs + 1 outputs.
1000Vdc, 15A per input, with fuse, fuse base and
1000vdc 30A disconnector. Surge protection
1000vdc 40A. Enclosure of 12 modules in ABS. Connectors
stuffing box.

SPF 3/1-40/1000/15 (122) - Photovoltaic protection panel
for 3 inputs + 1 outputs. 1000Vdc, 15A per input, with
fuse, fuse base and disconnector. 12 envelope
ABS modules with cable glands.

The ISB is designed to protect photovoltaic installations installed on roofs
in case of emergency or fire, offering maximum safety for firefighters and
the electrical installation.
Its design makes it easy to install even in existing installations.
Maximum current up to 40 A.
Maximum voltage up to 1500 VDC.
Includes automatic shut-off temperature sensor.
According to EN 60947-3, EN 61643-11.

The ISB is designed to protect photovoltaic installations installed on roofs
in case of emergency or fire, offering maximum safety for firefighters and
the electrical installation.
Its design makes it easy to install even in existing installations.
Maximum current up to 40 A.
Maximum voltage up to 1500 VDC.
Includes automatic shut-off temperature sensor.
According to EN 60947-3, EN 61643-11.

The ISB is designed to protect photovoltaic installations installed on roofs
in case of emergency or fire, offering maximum safety for firefighters and
the electrical installation.
Its design makes it easy to install even in existing installations.
Maximum current up to 40 A.
Maximum voltage up to 1500 VDC.
Includes automatic shut-off temperature sensor.
According to EN 60947-3, EN 61643-11.

The ISB is designed to protect photovoltaic installations installed on roofs
in case of emergency or fire, offering maximum safety for firefighters and
the electrical installation.
Its design makes it easy to install even in existing installations.
Maximum current up to 40 A.
Maximum voltage up to 1500 VDC.
Includes automatic shut-off temperature sensor.
According to EN 60947-3, EN 61643-11.

The ISB is designed to protect photovoltaic installations installed on roofs
in case of emergency or fire, offering maximum safety for firefighters and
the electrical installation.
Its design makes it easy to install even in existing installations.
Maximum current up to 40 A.
Maximum voltage up to 1500 VDC.
Includes automatic shut-off temperature sensor.
According to EN 60947-3, EN 61643-11.

The ISB is designed to protect photovoltaic installations installed on roofs
in case of emergency or fire, offering maximum safety for firefighters and
the electrical installation.
Its design makes it easy to install even in existing installations.
Maximum current up to 40 A.
Maximum voltage up to 1500 VDC.
Includes automatic shut-off temperature sensor.
According to EN 60947-3, EN 61643-11.

The ISB is designed to protect photovoltaic installations installed on roofs
in case of emergency or fire, offering maximum safety for firefighters and
the electrical installation.
Its design makes it easy to install even in existing installations.
Maximum current up to 40 A.
Maximum voltage up to 1500 VDC.
Includes automatic shut-off temperature sensor.
According to EN 60947-3, EN 61643-11.

Its design makes it easy to install even in existing installations.
Maximum current up to 40 A.
Maximum voltage up to 1500 VDC.
Includes automatic shut-off temperature sensor.
According to EN 60947-3, EN 61643-11.