Tu tienda de energía solar

Energy Meter single-phase 100 A maximum.
The Energy Meter can be used for these things:
1. grid meter, and used as a control input for an ESS System (1).
2. Measuring the output of a photovoltaic inverter.
3. Measuring the output of an AC generator set.
The meter is connected to the Color Control GX. There are two options for its wiring:
1. direct connection, using the RS485 to USB interface with a 1.8 m long cable, or the 5.0 m long cable.
2. Wireless connection via Zigbee

The Victron EM24 Ethernet is a standard device for measuring the power and energy of a three-phase application, for example in the distribution box or for measuring the output of a PV inverter, an AC generator or an inverter or inverter/charger.

Kit de protección sobretensión de CC (Tipo I/II)

AC Overvoltage Protection Kit (Type I/II))

Control center and energy manager via Ethernet, including Energy Meter.

Interfaz para conectar productos Victron al ordenador.

VE.Can to CAN-bus BMS type B Cable 1.8m

P nominal: 4600 W salida: 230V AC / 50 Hz, 48V. IP 54. Speedwire y Webconnect integrado.

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, Victron Energy SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw).

MPPT 60A charge regulator for battery systems of 12, 24, 36 or 48 volts and up to 250V photovoltaic field, Victron Energy brand SmartSolar MPPT 250/60-Tr.

Charge Controller Victron Energy SmartSolar MPPT 150/60

The Victron UTP RJ45 Cable 1.8m is a cable for connecting the Phoenix Inverter Control, the VE Interface MK3-USB and the VE.Bus connections between multiple VE.Bus and GX devices.

8000VA 48V 230V IP21 (Incluye cargador 110A)

Fuse Mega. Pack 5 pcs.

Fusible Mega.

MEGA Fuse 125A/58V

For simple single-parallel or series-parallel connection of photovoltaic modules.

8kw three-phase inverter (2 MPPT) "transformerless"

Integrated WLAN or Ethernet connection.

Max input voltage: 1000V
Maximum input current: 16A
IP65 protection
Maximum performance:98%
Warranty: 2 years

Energy meters are typically used in an energy storage system, to measure the power and energy of the entire application in the distribution box and minimize the import or export of energy to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM gateway.
ET340 (RS485 - for 3-phase max. 65 A)