Tu tienda de energía solar

Measured parameters:
- 2 Irradiance
- 2 Module temperature
- Ambient temperature
- Relative humidity
- Amount of precipitation
- Atmospheric pressure
- Wind direction
- Wind speed
Communication: Modbus RTU Protocol

Weather station structure

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

The set is pre-assembled and can be easily installed with any K2 guide
The insert nut M K2 is locked and can be moved in the guide by lightly pressing the cylinder screw
Includes 1 end clamp, 1 socket head screw, 1 M k2 insert nut with mounting clip and PA

Dome 6.10 Classic system connection set

4520A (C100)
212x576x837
230kg

AUTOTRAFO III 230-400+N 12000VA IP-23

Photovoltaic protection panel for 3 inputs + 3 outputs. 1000Vdc, 15A per input, with fuse and fuse base. Enclosure with 18 modules in ABS. MC4 connectors.

Photovoltaic protection panel for 4 inputs + 4 outputs. 1000Vdc, 15A per input, with fuse and fuse base. Enclosure of 2x12 modules in ABS. MC4 connectors.

Photovoltaic protection panel for 8 inputs + 8 outputs. 1000Vdc, 15A per input, with fuse and fuse base. Envelope of 3x18 modules. With MC4 connectors.

Mounted anti combiner type photovoltaic protection panel
in a 600X400X250 IP65 polyester cabinet composed of
input by 200A NH1 type fuses + Fuse Bases,
outputs using 20A 1000vdc fuses with protection of
surges. Cable gland, assembled and pre-wired

North solar PARKING structure with capacity for 2 spaces, galvanized finish without roof sheet
3 Kits 01V5 K2 singlerail structure
Capacity for 15 panels between 1m-1.13m x 2.1m-2.3m

Stops power losses
Prevents the PID effect
Measures insulation resistance.
IP56
MC4 connection
Output for 3 MPPT, chains up to 1000V with common negative
3 relay output

Assembly and fire protection system

digital anemometer

SUNMETER PRO WIND with LAMINATED solar cell with
SOLAR GLASS and with the same elements as in PV
module. Class A; Modbus RS485 output, Irradiance
Previous ± 2.1%, Previous Temp. ± 0.5°C, wind speed. Houses in
anodized aluminum. With mounting bracket and
Temperature probe input. Accuracy 2.%. service
recalibration after 12/18 months included.

For communication with a pulse anemometer it is necessary:
- 2 x M12 Male 8 pin
- 1 x M12 Y connector for Soluzione anemometer
- 1 x M12 Female 8 pin output to datalogger

Flat washer Wide wing

Prism 310A-E

[P&P1162] Lucas LX24 12V 86Ah

[P&P1230] Lucas LSLC 12V 260Ah