Tu tienda de energía solar

TTL 5V to RS485 gateway with galvanic isolation

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

With external 12 to 28 VDC power supply, 3 m connection cable, integrated microprocessor, active temperature compensation, integrated measurement of calibrated solar cell temperature and an RS485 interface, protocol: MODBUS, with permanently connected external ambient temperature sensor (Pt1000, cable length 3 m)

20kw single phase inverter (3MPPT)

Connection: Ethernet / WLAN
Max. input current: 24A
Max voltage input: 1000V
Max current input per string: 37.5A
IP65 protection
Maximum performance: 98%
Warranty: 5 years

FR 01V5 kit (5 modules) black - silver guides

Solution model: Solis + Dyness 50kW/100kWh
Inverter: Solis S6-EH3P50K-H
Inverter rated power: 50 kW three-phase
Recommended PV power: Up to 100 kW
Battery: Dyness BF100
Useful capacity: 100 kWh
Battery technology: LiFePO4
Application: Commercial/industrial storage.

Victron cable to connect the Phoenix Inverter Control, the VE Interface MK3-USB interface and the VE.Bus connections between multiple VE.Bus and GX devices.

Nominal P: 4000 W 2 MPP, without display. W-LAN and Webconnect included. IP65.

Power management connection for SolarLog Base

The Victron RS485 to USB interface is a cable with adapter to communicate RS485 devices such as energy meters to other USB devices such as Cerbo, Color Control, etc.

Ambient temperature sensor to connect to Si-RS485TC-2T-v, Pt1000 class A, incl. 3 m cable and plug-in connector (IP67)

Rated P: 250 kW; 12 MPPT input; U output 800V; IP66

ENPHASE ENV-S-WM-230 ENVOY-S METERED

Solarbloc 8V18 Kit (8 modules)

CLOSED TRIANGLES structure kit for a vertical panel.

Soluna MODUL 15K PACK HV (15kWh)

Sigen Energy Gateway C&I 600 kW

Compatible with up to 30 SigenStor inverters connected in parallel
3 circuit breaker positions reserved for SigenStor or other loads
0 ms switch to backup mode for uninterrupted power use
Prepared for connection of generator, heat pump or other controllable loads
350 ms anti-reverse protection against mains and generator
Uninterrupted power supply via PV + ESS/grid/generator

• High capacity: Up to 50 kW and 50 inverters.
• Storage Compatible: Works with SigenStor, generators and EVs.
• Security: Reverse flow 350 ms and backup 0 ms.
• Uninterrupted Power: Supply through PV + ESS / grid / generator.

SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.