K2-Light Guide 2.25 m (01V) SolidRail

FR 01V4 kit (4 modules) black

Coplanar kit for 1 vertically installed module of 60 and 72 cells, with a frame between 30 and 42 mm.

The kit includes:

Light Guide 2.4 m
OneEnd final plate set
OneMid center plate set
Protection cap for Light guide
Self-tapping rod set M10x250

Guide connector made of aluminum as a joining element between two K2 SingleRail 36.
The set includes:
1 SingleRail 36 connector (2001975, aluminum EN AW-6063 T66.
4 T-bolts M8x20 (1002387), A2 stainless steel.
4 M8 nuts (1000043), A2 stainless steel

FR kit Ascent 1.1-N/S (+1 module)

• SUB-1C Base: Supports charging/discharging up to 1C.
• Modular and stackable: Supports up to 7 battery modules per stack.
• IP66 protection: Dust and water resistant.

Compatible with Victron and Huawei L1

Photovoltaic protection panel for 2 inputs + 2 outputs. 1000Vdc, 15A per input, with fuse and fuse base. Enclosure of 12 modules in ABS. MC4 connectors.

FR 01V2 kit (2 modules) black

FR 01V3 kit (3 modules) black

Coplanar kit for 6 vertically installed modules of 60 and 72 cells, with a frame between 30 and 42 mm.

The kit includes:

Light Guide 2.40 m
OneEnd final plate set
OneMid center plate set
Protection cap for Light guide
Self-tapping rod set M10x250

Coplanar kit for 5 vertically installed modules of 60 and 72 cells, with a frame between 30 and 42 mm.

The kit includes:

Light Guide 2.40 m and Light Guide 3.30 m.
OneEnd final plate set
OneMid center plate set
Protection cap for Light guide
Self-tapping rod set M10x250

FR Safety guard Adjustable at two angles (without screws)

FR 01V5 kit (5 modules) black

• Three-phase power: 10 kW hybrid inverter for residential and commercial use
• Total integration: Combines solar energy, batteries, grid and generator in a single device
• Immediate backup: 0 ms instant changeover for critical loads
• Robust design: Compact, silent and resistant with IP66 protection for outdoors

SigenStack Battery Controller M1 - 1C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.

• SigenStack Tower Master Controller – coordinates and manages all battery modules
• Optimizes charging, discharging and balance between modules for efficiency and useful life
• Maximum capacity managed per tower: 252kWh

Voltage 48 V (45….53.5 Vdc)
Available power 90% (3.2kW)
Recommended discharge 37 A (1.7 kW)
Maximum discharge 74 A (3.5 kW)
Can-Bus and RS485 connection
Compatible with Victron and Solis
> 6000 life cycles @ 25ºC (15 years)
Dimensions: 442mm x 420mm x 132mm
Weight: 32kg.

Atmoce MR100-S (1-Phase Relay)

FR 01V6 kit (6 modules) black