FR 01V5 kit (5 modules) black - silver guides

Solution model: Solis + Dyness 50kW/100kWh
Inverter: Solis S6-EH3P50K-H
Inverter rated power: 50 kW three-phase
Recommended PV power: Up to 100 kW
Battery: Dyness BF100
Useful capacity: 100 kWh
Battery technology: LiFePO4
Application: Commercial/industrial storage.

Victron cable to connect the Phoenix Inverter Control, the VE Interface MK3-USB interface and the VE.Bus connections between multiple VE.Bus and GX devices.

3000VA 48V 230V IP22 (Includes 35A charger and GX device with display)

The Victron RS485 to USB interface is a cable with adapter to communicate RS485 devices such as energy meters to other USB devices such as Cerbo, Color Control, etc.

Coplanar kit for 8 vertically installed modules of 60 and 72 cells, with a frame between 30 and 42 mm.

The kit includes:

Light Guide 3.30 m
OneEnd final plate set
OneMid center plate set
Protection cap for Light guide
Self-tapping rod set M10x250

CLOSED TRIANGLES structure kit for a vertical panel.

Sigen Energy Gateway C&I 600 kW

Compatible with up to 30 SigenStor inverters connected in parallel
3 circuit breaker positions reserved for SigenStor or other loads
0 ms switch to backup mode for uninterrupted power use
Prepared for connection of generator, heat pump or other controllable loads
350 ms anti-reverse protection against mains and generator
Uninterrupted power supply via PV + ESS/grid/generator

• High capacity: Up to 50 kW and 50 inverters.
• Storage Compatible: Works with SigenStor, generators and EVs.
• Security: Reverse flow 350 ms and backup 0 ms.
• Uninterrupted Power: Supply through PV + ESS / grid / generator.

SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.

• Compact hybrid inverter: Nominal power of 2 kW, ideal for small homes or autonomous systems
• Flexible integration: Compatible with solar panels, batteries and external generators
• Automatic backup: Instant (0 ms) switch to backup mode for critical loads
• Robust design: Slim metal case, no fans, quiet operation (≤25 dB)

• 4 kW three-phase hybrid inverter: Ideal for medium-sized homes or autonomous systems
• Full integration: Compatible with solar panels, SigenStor batteries and generators
• Automatic backup: Instant (0 ms) switch to backup mode for critical loads
• Robust design: Metal casing, no fans, silent operation (≤25 dB)

• Compatible with multiple Sigen C&I inverter connections for microgrid systems.
• Seamless switching, ensuring 0 ms interruption on the load side.
• Integrated bypass circuit for greater system reliability.
• Compatible with the connection of diesel generators and intelligent control.
• Real-time current monitoring with 350 ms backflow protection.

ATS1-4P125 - AUTOMATIC TRANSFER SWITCH (ATS), 4P, 125A

The eBick Ultra 175 battery is Cegasa's answer to installers looking for a pre-installed and self-managing battery, “plug and play”.
It is ideal for replacing lead batteries in existing installations, as well as for new ones.
self-consumption and off-grid installations with needs between 13 and 54 KWh.
The eBick Ultra 175, offering a degree of protection IP30, is stackable up to 2 heights and up to 8 parallel connections in controlled conditions for communication.

The Color Control GX is the communications center of your facility. It offers real-time information at a glance and allows you to control all products connected to it. You can control your entire system - from virtually anywhere in the world - by accessing your Color Control GX through our free-to-use Victron Remote Management (VRM) Portal.

Energy meters are typically used in an energy storage system, to measure the power and energy of the entire application at the distribution box and minimize the import or export of energy to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM portal.
ET340 (RS485 - for three-phase max. 65 A)

Mega Fuse. Pack 5 pcs.

The Victron EM24 Ethernet is a standard device for measuring the power and energy of a three-phase application, for example at the distribution box or for measuring the output of a PV inverter, AC generator or inverter or inverter/charger.

Mega Fuse. Pack 5 pcs.