Tu tienda de energía solar

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / U AC1.0 / 1.0 kV DC 1.5 / 1.5 kV
Weather and UV resistance

Măsurare indirectă.

• High capacity: Supports up to 9 inverters.
• Storage compatible: Works with SigenStor, generators, and EVs.
• Safety: Reverse flow 350 ms and 0 ms backup.
• Uninterrupted power: Continuous supply via PV + ESS / grid / generator.

Alimentare pentru Cluster Controller, Data Manager, Gateway sau Inverter Manager.

Interfață pentru conectarea produselor Victron la computer.

Controler dinamic de putere cu injecție ZERO pentru instalații mici: Posibilitatea de a controla 1 generator de până la 50 kW. Pentru funcția sa exclusiv de contor nu are limitare de putere. Nu are ecran. Respectarea criteriilor UNE 217001-IN SI RD244/2019. Integreaza un regulator si un contor in acelasi dispozitiv, eliminand nevoia altor componente externe in reglarea puterii. Permite reglarea puterii obținute din surse regenerabile folosind puterea reală (putere fără armonici) și oferirea de garanții fizice și logice pentru a decide ce putere ar trebui sau dorim să consumăm din rețea. Obiectivul final este limitarea sau eliminarea exportului de energie, în cel mai eficient mod, maximizând producția cu respectarea restricțiilor normative și tehnice. Se aplică instalațiilor monofazate și trifazate.

The TCC-CAN control module for Cegasa's eBick Ultra 175 modular battery.
The BMS, through CAN communication, allows sending the most relevant battery data such as SOC, temperature, alarms, current and voltage both in charge and discharge, among others. In addition, with the eViewer App, via Bluetooth connection, it allows to visualize the module parameters such as battery SOC, cycles and bus voltage, among others.

Kit coplanar para 7 módulos instalados en vertical de 60 y 72 células, con marco de entre 30 y 42 mm.

El kit incluye:

Guía Light 2,5 m
Set de pletina final OneEnd
Set de pletina central OneMid
Tapa de protección para guía Light
Set varilla autorroscante M10x250

Huawei SUN2000-12KTL-M5

Maximum input voltage: 1100V
Maximum input current: 40A
DC reverse polarity / AC overcurrent / short circuit protection, anti-islanding
Protection: IP66
Maximum efficiency: 98.4%
10 year warranty

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, Victron Energy SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw).

Control center and energy manager via Ethernet, including Energy Meter.

Victron solar charge controller with maximum power point tracking MPPT SmartSolar 100/30. Victron SmartSolar solar charge controllers have integrated Bluetooth with which you can configure, monitor, and update the controller with your SmartPhone, tablet or other Apple or Android device.

Smart Meter TS 65A-3; for recording energy consumption, three-phase, direct metering

Modular electric energy meter that displays power (kWh, kVArh and kVA) and other measurements directly on its backlit LCD display.
It is designed for three-phase load metering with connection via CT and is suitable for applications up to 12000 A.

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

Con fuente de alimentación externa de 12 a 28 VCC, cable de conexión de 3 m, microprocesador integrado, compensación de temperatura activa, medición integrada de la temperatura de la célula solar calibrada y una interfaz RS485, protocolo: MODBUS, con sensor de temperatura ambiente externo conectado permanentemente (Pt1000, longitud del cable 3 m)

20kw single phase inverter (3MPPT)

Connection: Ethernet / WLAN
Max. input current: 24A
Max voltage input: 1000V
Max current input per string: 37.5A
IP65 protection
Maximum performance: 98%
Warranty: 5 years

Victron cable for connecting the Phoenix Inverter Control, the VE Interface MK3-USB and the VE.Bus connections between multiple VE.Bus and GX devices.