Your solar energy shop

Combiner type photovoltaic protection panel

Custom-made with 13 inputs and 1 output with 1500 VDC 400A disconnector, + fuse bases and 14x85 1500vdc 16A fuses in IP66 polyester cabinet 747x536x300mm with opaque door, with wall grommet and cable gland for ground, assembled and pre-wired.

SPF 1/1 string, MC4 type connector, protection fuses, 40kA 8/20, cartridge (1000Vdc), box with 6 IP65 modules

SPF 2/1-40/1000/15 (122) - Photovoltaic protection panel
for 2 inputs + 1 outputs.
1000Vdc, 15A per input, with fuse, fuse base and
1000vdc 30A disconnector. Surge protection
1000vdc 40A. Enclosure of 12 modules in ABS. Connectors
stuffing box.

SPF 3/1-40/1000/15 (122) - Photovoltaic protection panel
for 3 inputs + 1 outputs. 1000Vdc, 15A per input, with
fuse, fuse base and disconnector. 12 envelope
ABS modules with cable glands.

Sigen accessory - IP68 RJ45 connector for outdoors

Sigen Accessory- AC SP Connector (3-6kW)

Up to 10 inverters can be connected to S2-RF-LINK. Insert the data logger directly into the inverter
port , the gateway uses wired ethernet to connect to the home router, and transmits data to
SolisCloud. SolisCloud, the Solis monitoring platform, allows for remote system monitoring and
control. The data is clear and detailed, making it easy to monitor and troubleshoot from anywhere
anytime.

Supports WiFi and LAN communication
• Plug and play, quick installation
• Fault alarm, real-time monitoring
• Status indicator, easy to show working status
• RESET button, one key to send data, convenient debugging
• Supports Bluetooth close connection and debugging
• One-key inverter address assignment,
efficient and labor saving

Co-molded connector with outdoor cable with external polyurethane jacket. Double shielded, 3 pairs of twisted conductors. Diameter 5.3 mm (m). On one side loose pins on the other M12 8-pin female connector. Cable length 3m. Also available L=5m, 10m, 20m

Photovoltaic protection panel for 3 MPPT out of a total of 6
string (2 per MPPT) fuses 20A 10x38 1000vdc with
50A disconnector and BF3 surge protection
40/1000, IP66 polyester cable gland and cabinet
600x400x250 with opaque door and 180 opening. Assembled and
prewired.

Photovoltaic protection panel for 8 MPPT of a total of
16 string (2 per MPPT) fuses 20A 10x38 1000vdc with
50A disconnector and BF3 surge protection
40/1000, IP66 polyester cable gland and cabinet
800X600X250 with opaque door and 180 opening. Assembled and
prewired

Photovoltaic protection panel for 10 MPPT of a total of
20 string (2 per MPPT) fuses 20A 10x38 1000vdc with
50A disconnector and BF3 surge protection
40/1000, IP66 polyester cable gland and cabinet
1000x800x300 with opaque door and 180 opening. Assembled and
prewired.

Includes:

Complete interior insulation with high-density rock wool

Interior covering with OSB panels

Interior air conditioning system: 2 x 5kW split inverter air conditioning

Sigen Energy Gateway HYB-24 Inverter Connection Cabinet

It is a two-axis static ultrasonic anemometer used to make accurate measurements of wind speed and direction under all environmental conditions. It is capable of measuring wind speeds of up to 85 m/s without losing precision.

It has a heating option for quick defrosting. A model with an anodized aluminum alloy casing with anti-corrosion coating is available. This feature allows the instrument to be used even in particularly aggressive environments. The anemometer meets the requirements of MIL-STD-810G Method 509.6 (salt spray corrosion test). Its high immunity to electromagnetic interference makes it suitable for measurements in electrically noisy environments.

All measured weather data is transferred to the data loggers and receiving units via a 2-wire RS485 bus with Modbus RTU protocol. This sensor is also equipped with two analog outputs for wind speed and direction, factory configurable within 4-20 mA (standard), 0…1 V, 0…5 V or 0…10 V (to be specified when ordering).

40-foot maritime container adapted for energy storage applications of approximately 1 MWh, designed to guarantee optimal conditions of safety, thermal insulation and ventilation.

The interior has complete insulation using high-density rock wool, offering thermal and acoustic protection, and is covered with OSB panels for greater durability and technical finish.

The air conditioning system consists of 5 kW split inverter air conditioning units and a wall-mounted extractor fan with passive air inlet, ensuring efficient thermal control in high thermal load environments.

It includes a three-phase AC protection electrical panel, equipped with disconnectors, circuit breakers, differentials and surge protection, sized for up to 102 12kWh batteries.

The set is prepared for the integration of battery systems, inverters and auxiliary components, offering a modular, safe and quick installation solution for medium-scale photovoltaic and industrial projects.

48V 280Ah EBick LV module. Configurations available from
13 kWh up to 269kWh. Up to 20 modules can be connected in parallel
and stack up to a maximum of 2 heights without plinth and up to 4 heights
with socket. Allows connection in power and communications of the
EBick LV modules using quick connectors, providing the
power output for connection with the inverter, and integrating the
necessary overload and short circuit protections within the
module itself.

MT-03505-A Three-phase connector (male and female)

Atmoce Stack Control Unit (SCU) Cap of M-ELV BattBank for C&I Application

Atmoce AC connection base for M‑ELV BattBank 16 kWh in commercial and industrial applications.