Huawei 4KTL-L1

Smart Dongle - WLAN Included
Maximum input voltage: 600V
Maximum intensity by MPPT: 12.5A
Anti-islanding / reverse polarity protection DC / temperature / AC overcurrent, short circuit and overvoltage
Maximum efficiency:98%
Protection: IP65
10 year warranty

Huawei 5KTL-L1

Smart Dongle - WLAN-FE Included
Maximum input voltage: 1,100 V
Maximum input current per MPPT: 13.5A
DC reverse polarity / AC overcurrent / short circuit protection, anti-islanding
Protection: IP65
Maximum efficiency: 98.4%
10 year warranty

Maximum voltage: 1500 V
Cable diameter: 5,5 - 9 mm
Cable cross section: 4 -6 mm2

Maximum voltage: 1500 V
Cable diameter: 5,5 - 9 mm
Cable cross section: 4 -6 mm2

Huawei DDSU666-H (1-Ph)

Indirect measurement wattmeter (ampere clamp included)
It allows measuring the consumption of our electrical network.
With an RS485 communication interface to communicate with Huawei inverters
3 years warranty.

• 1 % high-accuracy power measurement for precise control of consumption, generation, and energy optimization
• Plug & play integration with Sigenergy systems via Modbus, no extra configuration needed
• Real-time monitoring with 100 ms data refresh for instantaneous response
• Versatile installation: direct connection up to 100 A or with external current transformers (CTs)

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates the PV inverter, battery power conversion system (PCS), EV DC charger for electric vehicles, battery pack and energy management system (EMS).

Solis-100K-5G-DC (10 MPPT)

Maximum input voltage: 1100V
Maximum input current: 10*26A
Maximum efficiency: 98.7%
DC reverse polarity/temperature/short circuit and surge protection
Incorporates type II surge protection in AC and DC
5-year warranty (extendable up to 20 years)

• 1 % high-accuracy power detection for precise control
• 100 A single-phase direct connection with built-in CT
• Modbus RTU communication via RS485
• Supports export/import limitations and AI-ready

• 1% high-accuracy power detection for precise control
• Integrates smoothly with Sigenergy devices, no need for setup
• Top-class 100 A direct connection in Power Sensor with built-in CT
• 100 ms data refresh rate, instantaneous data feed

Stops power losses
Prevents PID effect
Measure insulation resistance.
IP56
MC4 connection
Output for 2 MPPT, chains up to 1000V with common negative
1 relay output

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

Panou de protectie fotovoltaic pentru 2 intrari + 2 iesiri. 1000Vdc, 15A pe intrare, cu siguranță și bază pentru siguranță. Carcasă de 12 module din ABS. conectori MC4.

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

A power meter transmits the measured amount of power to the SolarLog for analysis. It serves as a consumption meter, showing a comparison of produced and consumed power. It can be configured to operate with the SolarLog in three different modes:
- Measuring energy consumption for optimal utilization of the power generated.
- Measuring the total amount of energy that has been fed into the grid.
- Measuring the energy production of inverters that are not directly managed by SolarLog.

Three-phase bidirectional meter.
Nominal voltage 230 V/400 V
Frequency 50 Hz/±5 %.
Nominal/limit current per phase conductor 5 A/63 A (>63 A combined with external current transformers)
Starting current <25 mA
Connection cross-section From 10 mm² to 16 mm² 1) (for 63 A protection)

Con suministro de voltaje externo de 12 a 28 VCC, cable de 3 m, microprocesador integrado, compensación de temperatura activa, medición de temperatura integrada en la interfaz RS485, con tomas para un sensor de temperatura externo (Pt1000) y un sensor de velocidad del viento externo (conectores no incluidos), protocolo: MODBUS

Compact equipment for decentralized systems and large-scale photovoltaic systems due to its high power density.

“Active cooling” with speed-controlled fans ensure optimal
optimal cooling with lower energy consumption, maximizes production
due to temperature reduction

Max power of PV generator: 360 kWp
Max input voltage 1500V
Max input current/Max short circuit current: 180 A/325 A
Number of MPP followers: 1
Certificate for Spain and Portugal
5 year warranty

Stops power losses
Prevents PID effect
Measure insulation resistance.
IP56
MC4 connection
Output for 2 MPPT, chains up to 1000V with common negative
1 relay output

35A MPPT charge controller for battery systems of 12, 24, 36 and 48 volts and up to 150V photovoltaic field, Victron Energy brand SmartSolar MPPT 150/35.