Skip to Content

Tu tienda de energía solar

Encuentra los módulos solares, los inversores, las baterías y muchos más accesorios que buscabas

Batteries

Baterías

Las baterías son el método de acumulación de energía fotovoltaica más viable por el momento. La solución perfecta para el almacenamiento de la energía generada por los paneles durante el día y poder emplearla durante la noche, durante un periodo de mal tiempo, o incluso en caso de blackout.


Necesarias en soluciones aisladas y complementarias, pero muchas veces recomendables, en soluciones de autoconsumo energético con apoyo de la red, o como lo hacemos llamar en Plug & Play. Energy, "Autoconsumo mejorado". Y si tienes dudas no te preocupes, porque proporcionamos el mejor servicio técnico.

Odoo • Texto e imagen
No results found for 'co´n'. Showing results for 'con'.
Sigenergy SigenStor BAT 10 (9kWh) (11130012)
• Capacity: 9kWh, full discharge for maximum efficiency.
• Modular and stackable: Up to 6 modules per stack, scalable to 54kWh.
• Quick installation: Self-pluggable connectors, commissioning in minutes.
• Smart integration: Compatible with SigenStor EC inverters and mySigen app.
Sigenergy SigenStack BAT 12 (12kWh) (11130014)
• High density: 12kWh/module, up to 253kWh/system
• Safety: IP66, fire suppression and thermal cell control
• Compatible and scalable: CAN integration with Sigenergy inverters, 4‑21 modules
• Quick installation: Floor mounting, air cooling, simple commissioning
Sigenergy SigenStor BAT 6 (6kWh) (11130018)
• Capacity: 6kWh.
• Modular and stackable: Up to 6 modules per stack, scalable up to 36kWh.
• Quick installation: Self-pluggable connectors, commissioning in minutes.
• Smart integration: Compatible with SigenStor EC inverters and mySigen app.
Sigenergy SigenStor BAT 5 (5kWh) (11130002)
• Capacity: 5kWh.
• Modular and stackable: Up to 6 modules per stack, scalable up to 30kWh.
• Quick installation: Self-pluggable connectors, commissioning in minutes.
• Smart integration: Compatible with SigenStor EC inverters and mySigen app.
Only 2 Units left in stock.
Sigenergy SigenStack Cover (11180003)
The SigenStack cover serves as a protection for the battery modules inside the tower. Its main function is to safeguard the modules from external elements such as dust, humidity, and adverse environmental conditions, helping to prolong the useful life of the system and maintain the safety of the installation.
Sigenergy SigenStack Base MAIN-0,5C (11180002)
• Modular compatibility: Supports up to 5 SigenStack 0.5C modules
• Stackable design: Compact (770 × 195 × 363mm) and easy to install
• Integrated connectivity: Power and communication interfaces included
• IP66 rating: Dust and water resistant
Sigenergy SigenStack BC M2-1C-BST (11140002)
SigenStack Battery Controller M1 - 1C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.
Sigenergy SigenStack Base MAIN-1C (11180006)
• SigenStack Tower Master Controller – coordinates and manages all battery modules
• Optimizes charging, discharging and balance between modules for efficiency and useful life
• Maximum capacity managed per tower: 252kWh
Pylontech US3000 48V (3.6 kWh)
Voltage 48 V (45….53.5 Vdc)
Available power 90% (3.2kW)
Recommended discharge 37 A (1.7 kW)
Maximum discharge 74 A (3.5 kW)
Can-Bus and RS485 connection
Compatible with Victron and Solis
> 6000 life cycles @ 25ºC (15 years)
Dimensions: 442mm x 420mm x 132mm
Weight: 32kg.

Llega en 1 semana!

TCC-CAN Ultra 175
The TCC-CAN control module for the eBick Ultra 175 modular battery from Cegasa.
The BMS, through CAN communication, allows you to send the most relevant battery data such as SOC, temperature, alarms, current and voltage during charging and discharging, among others. In addition, with the eViewer App, through a Bluetooth connection, it allows you to view the module parameters such as battery SOC, cycles and bus voltage, among others.
Only 1 Units left in stock.
Sigenergy SigenStack BC M2-0.5C (11140001)
SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.
Only 5 Units left in stock.
Cegasa eBick Ultra 175 -48280M (13.4kWh)
The eBick Ultra 175 battery is Cegasa's answer to installers looking for a pre-installed and self-managing battery, “plug and play”.
It is ideal for replacing lead batteries in existing installations, as well as for new ones.
self-consumption and off-grid installations with needs between 13 and 54 KWh.
The eBick Ultra 175, offering a degree of protection IP30, is stackable up to 2 heights and up to 8 parallel connections in controlled conditions for communication.
Only 4 Units left in stock.
Atmoce AC Connection Base for M‑ELV BattBank 16 kWh
Atmoce AC connection base for M‑ELV BattBank 16 kWh in commercial and industrial applications.
¡Nuevo producto de camino!
Atmoce Domo Kit Autoconsumo - Edición Especial Domo Electra (7kWh)
DomoAtmoce: Atmoce 7kWh Self-Consumption Kit - Domo Electra Special Edition