Tu tienda de energía solar

Dynamic power controller with ZERO injection for small installations: Possibility of controlling 1 generator of up to 50 kW. For its function exclusively as a counter it has no power limitation. It does not have a screen. Compliance with the criteria of UNE 217001-IN AND RD244/2019. It integrates a regulator and a counter into the same device, eliminating the need for other external components in power regulation. It allows regulating the power obtained from renewable sources using real power (power without harmonics) and providing physical and logical guarantees to decide what power we should or want to consume from the network. The ultimate objective is to limit or eliminate the export of energy, in the most efficient way, maximizing production while complying with regulatory and technical restrictions. Applicable to single-phase and three-phase installations.

The TCC-CAN control module for the eBick Ultra 175 modular battery from Cegasa.
The BMS, through CAN communication, allows you to send the most relevant battery data such as SOC, temperature, alarms, current and voltage during charging and discharging, among others. In addition, with the eViewer App, through a Bluetooth connection, it allows you to view the module parameters such as battery SOC, cycles and bus voltage, among others.

85A MPPT solar charge regulator for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, from the Victron Energy brand, model SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw)

Control center and energy manager via Ethernet, includes Energy Meter.

Victron solar charge regulator with MPPT SmartSolar 100/30 maximum power point tracking. Victron SmartSolar solar charge regulators have integrated Bluetooth with which you can configure, monitor, and update the controller with your SmartPhone, tablet or other Apple or Android device.

Smart Meter TS 65A-3; for recording energy consumption, three-phase, direct measurement

Modular electric energy meter that displays power (kWh, kVArh and kVA) and other measurements directly on its backlit LCD screen.
It has been designed for three-phase load measurement with connection via CT and is suitable for applications up to 12000 A.

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

With external 12 to 28 VDC power supply, 3 m connection cable, integrated microprocessor, active temperature compensation, integrated measurement of calibrated solar cell temperature and an RS485 interface, protocol: MODBUS, with permanently connected external ambient temperature sensor (Pt1000, cable length 3 m)

20kw single phase inverter (3MPPT)

Connection: Ethernet / WLAN
Max. input current: 24A
Max voltage input: 1000V
Max current input per string: 37.5A
IP65 protection
Maximum performance: 98%
Warranty: 5 years

Victron cable to connect the Phoenix Inverter Control, the VE Interface MK3-USB interface and the VE.Bus connections between multiple VE.Bus and GX devices.

Nominal P: 4000 W 2 MPP, without display. W-LAN and Webconnect included. IP65.

Power management connection for SolarLog Base

The Victron RS485 to USB interface is a cable with adapter to communicate RS485 devices such as energy meters to other USB devices such as Cerbo, Color Control, etc.

Ambient temperature sensor to connect to Si-RS485TC-2T-v, Pt1000 class A, incl. 3 m cable and plug-in connector (IP67)

Sigen Energy Gateway C&I 600 kW

Compatible with up to 30 SigenStor inverters connected in parallel
3 circuit breaker positions reserved for SigenStor or other loads
0 ms switch to backup mode for uninterrupted power use
Prepared for connection of generator, heat pump or other controllable loads
350 ms anti-reverse protection against mains and generator
Uninterrupted power supply via PV + ESS/grid/generator

SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.

• Compatible with multiple Sigen C&I inverter connections for microgrid systems.
• Seamless switching, ensuring 0 ms interruption on the load side.
• Integrated bypass circuit for greater system reliability.
• Compatible with the connection of diesel generators and intelligent control.
• Real-time current monitoring with 350 ms backflow protection.

The kit with inverter and battery at an unbeatable price

Solis 5 kW inverters and Dyness batteries are the best solution for your solar installation

Ideal for residential installations

You will be able to consume your solar energy during the day and use the battery at night

In the pack you will also find wifi/ethernet included

Take advantage of this offer now and order your solar kit