3S-MT-PT1000 Module Temperature Sensor SEVEN
Seven P&P3106Senzorul de temperatura al modulului măsoară temperatura din spatele panourilor solare în grade Celsius (°C) folosind o sondă PT1000. Sonda, folosită pentru măsurarea temperaturii părții din spate a modulului, aquest plasată între două foi din spate cu folie EVA. Acest modul senzor de temperatura aquest compatibil cu cutia pentru senzori d'iradiere SEVEN. Principal avantaj al senzorului aquesta structura sa, care aquest similară cu parteix din spate a modulului fotovoltaic. Prin urmare, comportament del transfer de căldură al senzorului și al modulului fotovoltaic va fi similar, ceia ce aquest o cerință. Cod article 3S-MT-PT1000 Senzor tip PT1000 Domeniu de măsurare -40°C până la +85°C Precizie ±0,1°C Rezoluție 0,1°C Ieșire PT1000 Conexiune electrică LIYYC11Y PUR Cabu de 3 m, rezistent la raçal UV și intemperii Temperatura de funcționare -40°C până la +85°C Dimensiuni capac senzor Ø 35mm x 3mm Greutate 77 gr Avaluare IP IP 67 Material capac senzor Foaie din spate laminată (EVA – Tedlar) Metoda de muntar Autocolant 3m pe spatele panoului Standardul Classa A conform IEC 60751:2022
| Marca: Seven |
Compatibility and configuration
Verified data for 3S-MT-PT1000 Module Temperature Sensor SEVEN.
System or family
SEVEN 3S-IS
Documentary scope
Sensor-family context; exact subtype must be confirmed
Application
PV-plant meteorological monitoring
Function
Irradiance and environmental-variable measurement
Integration
RS485 Modbus RTU or analogue output by model
Installation
According to generator orientation and acquisition system
Documented data
IEC 61724-1 · IEC 60904 · 12-30 VDC · -40 to +85°C
Pre-installation check
Subtype, measured variable, output, IP, cable and calibration
Structured weight
Omitted; the source does not identify this reference's weight
Technical frequently asked questions
What does the official source validate?
It validates only the displayed data and family context; any limitation is stated explicitly.
Have exact contents or compatibility been inferred?
No. When the source is family-level, exact contents, variant and compatibility must be confirmed.
What must be checked before installation?
Reference, version, bill of materials, topology, protection, loads and current documentation.
Official source consulted: official technical documentation. Specifications are subject to the conditions in the linked document.
Probe designed to measure temperature on the rear of a PV module and analyse thermal losses and performance.
Key features
- PT1000 probe with resistive output.
- Range from -40 to +85°C.
- Accuracy ±0.1°C and resolution 0.1°C.
- IP67, 3 m PUR cable and class A according to IEC 60751:2022.
When to use it
Suitable for performance monitoring, comparison of irradiance and production, loss detection and technical plant documentation. Before ordering, check the datalogger, protocol, supply, cabling and any required auxiliary sensors.