Block-based modularity
Six 261.17 kWh blocks organise capacity, conversion and maintenance into subsystems.
REFERENCE C&I BESS ARCHITECTURE
Solis FlexCore-ID · 1.567 kWh / 600 kW
Indoor modular hybrid architecture for integrating storage with existing PV. The reference combines six battery blocks with six 100 kW hybrid inverters.
Nominal capacity1.567 kWh
Nominal power600 kW
Blocks6 × 261.17 kWh
ArchitectureHybrid · indoor
OperationLFP · 0.5C
ProtectionBackup < 10 ms per unit
What this architecture delivers
Existing PV integration
Smart Port couples existing generation and supports export control according to the selected configuration.
Integrated backup
Each inverter has a dedicated AC backup output; critical loads and autonomy are defined in engineering.
Indoor LFP battery
High-voltage architecture, LFP chemistry and a 0.5C reference rate for indoor installation.
Reference configuration
Indicative breakdown of the system shown. Final references, protection and accessories are validated against the single-line diagram and real project data.
| Quantity | Equipment or material | Function and criterion | Scope |
|---|---|---|---|
| 78 | FlexCore-ID BAT20kWh battery modules · 20.09 kWh · ref. 2607130001 | 13 modules per block; 78 × 20.09 kWh = 1,567.02 kWh. | Included |
| 6 | FlexCore-ID CB250A HV control boxes · ref. 2607130002 | One per block for switching, protection, BMS and communications. | Included |
| 6 | FlexCore-ID AP3 accessory kits · ref. 2607130006 | One kit per 13-module block: structure, cabling and connectors. | Included |
| 6 | 100 kW Solis hybrid inverters | One per block; exact reference and firmware are validated before quotation. | Included |
| Engineering dependent | Smart Port, metering, protection and communications | Sized against the single-line diagram, existing PV, grid and control strategy. | Engineering dependent |
| Optional | Renlogger-C / web supervision | Optional item for zero export, time shifting, peak shaving and setpoints. | Optional |
This is a commercial and technical reference, not a closed BOM for purchasing or construction. The final BOQ may vary because of grid, regulations, protection, cabling, EMS, communications, works and engineering requirements.
Before finalising the BOM
We need to validate the following data to turn this reference into an executable quotation.
Hourly or 15-minute load curve and contracted power.
Single-line diagram, voltage, phases, transformer and point of connection.
Operating goal: self-consumption, peak shaving, backup or microgrid.
Available space, clearances, access and environmental conditions.
Critical loads, autonomy, starting peaks and control strategy.
Frequently asked questions
Is this bill of materials final?
No. It is the reference configuration that explains the stated capacity and power. The final list is validated against the single-line diagram, grid, load profile and current documentation.
Does it include switchgear, protection, cabling and commissioning?
Only items explicitly listed are considered included. Switchgear, protection, cabling, communications, works, transport and commissioning are defined in the final proposal.
Can power or capacity be adjusted?
Yes, where the architecture and manufacturer range permit. Every change requires recalculating blocks, conversion, control, protection and operating conditions.
Turn this reference into a proposal for your installation
Share the load curve, single-line diagram and project goal. The storage team will prepare a traceable architecture and BOQ.
Reference source: Plug and Play Energy C&I BESS Portfolio and technical components verified in Odoo. · Technical documentation · 2026-09-19