All in one
Battery, inverter and thermal management are integrated in each system, reducing site interfaces.
REFERENCE C&I BESS ARCHITECTURE
Solis EverCore · 1.566 kWh / 750 kW
Outdoor all-in-one C&I solution integrating battery, PCS and thermal management. Six 261 kWh and 125 kW systems form the 1,566 kWh and 750 kW reference.
Nominal capacity1.566 kWh
Nominal power750 kW
Blocks6 × 261 kWh
ArchitectureAll in one · outdoor
OperationLFP · 0.5P
ProtectionIP55 cabinet · IP66 inverter
What this architecture delivers
Ready for outdoor use
IP55 cabinet and IP66 inverter, with a declared operating range from -25 to +55 °C.
Industrial power
Each system provides 125 kW; the reference combines six units to reach 750 kW.
Coordinated control
Metering, EMS and setpoints are defined according to the PV installation and operating strategy.
Reference configuration
Indicative breakdown of the system shown. Final references, protection and accessories are validated against the single-line diagram and real project data.
| Quantity | Equipment or material | Function and criterion | Scope |
|---|---|---|---|
| 6 | Integrated EverCore 261 kWh / 125 kW system | Integrated LFP battery, PCS and thermal management; six units form the reference. | Included |
| Engineering dependent | Metering, AC switchgear and protection | Sized against grid, transformer, selectivity and point of connection. | Engineering dependent |
| Engineering dependent | Communications, EMS and plant control | Architecture and protocols according to charging, discharging and export strategy. | Engineering dependent |
| Optional | Renlogger-C / web supervision | Optional item for zero export, time shifting, peak shaving and setpoints. | Optional |
This is a commercial and technical reference, not a closed BOM for purchasing or construction. The final BOQ may vary because of grid, regulations, protection, cabling, EMS, communications, works and engineering requirements.
Before finalising the BOM
We need to validate the following data to turn this reference into an executable quotation.
Hourly or 15-minute load curve and contracted power.
Single-line diagram, voltage, phases, transformer and point of connection.
Operating goal: self-consumption, peak shaving, backup or microgrid.
Available space, clearances, access and environmental conditions.
Critical loads, autonomy, starting peaks and control strategy.
Frequently asked questions
Is this bill of materials final?
No. It is the reference configuration that explains the stated capacity and power. The final list is validated against the single-line diagram, grid, load profile and current documentation.
Does it include switchgear, protection, cabling and commissioning?
Only items explicitly listed are considered included. Switchgear, protection, cabling, communications, works, transport and commissioning are defined in the final proposal.
Can power or capacity be adjusted?
Yes, where the architecture and manufacturer range permit. Every change requires recalculating blocks, conversion, control, protection and operating conditions.
Turn this reference into a proposal for your installation
Share the load curve, single-line diagram and project goal. The storage team will prepare a traceable architecture and BOQ.
Reference source: Plug and Play Energy C&I BESS Portfolio and technical components verified in Odoo. · Technical documentation · 2026-09-19