Your solar energy shop

Combiner type photovoltaic protection panel

Custom-made with 13 inputs and 1 output with 1500 VDC 400A disconnector, + fuse bases and 14x85 1500vdc 16A fuses in IP66 polyester cabinet 747x536x300mm with opaque door, with wall grommet and cable gland for ground, assembled and pre-wired.

The albedometer is used to measure the irradiance values and albedo ratio of bifacial panels. In addition to the aforementioned measurements, it also includes the internal temperature sensor of the cell. Supplied together with mounting bracket and cable.

All measured meteorological data are transferred to dataloggers and
receivers through a 2-wire RS485 bus with Modbus RTU protocol.

The PV albedometer provides the data necessary to calculate the coefficient of performance and measure solar albedo when using bifacial panels.

2 pcs. Silicon cell sensors with internal temperature
sensor,
Irradiance: 0...1600 W/m2(Temp. Compensated),
Output: RS485 port (includes 3 m PUR cable)
Communication protocol: MODBUS RTU and
SunSpec compatible

NUMAX 12V 260 AH C100 225AH C20

K2-Light Guide 0.50 m SolidRail

FR Rod M10*250

15º aluminum triangle VXL15 (guide support leg 1600/465/1656mm)

Electric vehicle charging protection panel according to ITC-BT-52.
2 Poles, 32A, POP 50:550 permanent and transient overvoltage protection.
Resettable automatic

Kit FR 01H2 (2 modules) black

• 3.6 kW single-phase hybrid inverter: Ideal for medium-sized homes or autonomous systems
• Full integration: Compatible with solar panels, SigenStor batteries and generators
• Automatic backup: Instant (0 ms) switch to backup mode for critical loads
• Robust design: Metal casing, no fans, silent operation (≤25 dB)

• 4.6 kW single-phase hybrid inverter: Ideal for medium-sized homes or autonomous systems
• Full integration: Compatible with solar panels, SigenStor batteries and generators
• Automatic backup: Instant (0 ms) switch to backup mode for critical loads
• Robust design: Metal casing, no fans, silent operation (≤25 dB)

Solar-log compatible

Coplanar kit for 2 vertically installed modules of 60 and 72 cells, with a frame between 30 and 42 mm.

The kit includes:

Light Guide 2.4 m
OneEnd final plate set
OneMid center plate set
Protection cap for Light guide
Self-tapping rod set M10x250

SPF 1/1 string, MC4 type connector, protection fuses, 40kA 8/20, cartridge (1000Vdc), box with 6 IP65 modules

SPF 2/1-40/1000/15 (122) - Photovoltaic protection panel
for 2 inputs + 1 outputs.
1000Vdc, 15A per input, with fuse, fuse base and
1000vdc 30A disconnector. Surge protection
1000vdc 40A. Enclosure of 12 modules in ABS. Connectors
stuffing box.

SPF 3/1-40/1000/15 (122) - Photovoltaic protection panel
for 3 inputs + 1 outputs. 1000Vdc, 15A per input, with
fuse, fuse base and disconnector. 12 envelope
ABS modules with cable glands.

Photovoltaic protection panel for 10 inputs +
10 exits. 1000Vdc, 15A per input, with fuse and base
of fuse. Enclosure of 4x18 modules in ABS. with
MC4

Tenka 455W N-type ORION Series 3 TKA455M-108

Tenka 500Wp N-Type ORION Series 3 S TKA500M-120

Solis S6-GR1P5K-DC (5kW - 2 MPPT)

Max. input current: 14A
Max. input voltage: 600V
DC reverse polarity protection / against short circuit / over voltage / anti-island and temperature
It has an LCD screen for configuration and visualization of data in real time
5-year warranty (extendable up to 20 years)
Inverter power: 5kWn

Cablu de încărcare SigenStor EVDC 10S2 (14240014)