For homes and small professional projects.
Sigenergy SigenStor EC 30 TP (30kWn) (11010067)
Sigenergy P&P4288• 30 kW Trifásico: Potencia nominal y respaldo para comercios e industria. • 4 MPPTs: Hasta 48 kWp de solar con gestión optimizada. • Alta eficiencia 98,4 %: Máximo rendimiento energético. • IP66 y conectividad total: Robustez y control remoto integrado.
| Power (Wn): 30 K |
| Inverter / solar panel / Battery: Inversor |
| Marca: Sigenergy |
| Número de strings FV: 4 |
| singlephase/threephase: Trifásico |
Technical guide
Compatibility and configuration
Key data for the SigenStor EC 30 TP, a three-phase hybrid controller for SigenStor systems.
AC output
30 kW nominal · 33 kVA maximum
PV input
Up to 48 kW PV · 1,100 V · MPPT 160-1,000 V
MPPT trackers
4 MPPT · 1 string per MPPT · 16 A
Battery connection
SigenStor BAT 5.0/8.0 · 1-6 modules · 600-900 V
Backup output
36 kW peak for 10 s · 0 ms switchover
Efficiency
Up to 98.4%
Protection and temperature
IP66 · operation from -30 to 60 °C
Communication
WLAN, Ethernet, RS485 and Sigen CommMod
Weight
36 kg
Technical frequently asked questions
How is the PV input sized?
It supports up to 48 kW PV, 4 MPPT and 16 A per MPPT. Voc, Isc and the voltage range at extreme temperatures must also be checked.
Which batteries are supported?
The linked data sheet specifies SigenStor BAT 5.0 and 8.0, with 1 to 6 modules per controller.
What is required for 0 ms switchover?
It requires a Sigen Energy Gateway, SigenStor battery and controller power above the total load under the manufacturer test conditions.
Official sources published on this product page: data sheet · installation manual · warranty. Specifications are subject to the conditions in the linked documents.
AC-side storage option
Add Atmoce storage without replacing this inverter
In grid-connected installations with a compatible architecture, Atmoce storage can be added on the AC side.
Important: The integration is AC-coupled: it does not imply connection to the battery port or direct DC compatibility. Phases, metering/EMS, backup, protection and system topology must be validated before quoting.