Skip to Content

Batteries

Technical selection for professionals

How to choose a solar battery for a professional project

Choosing a solar battery takes more than comparing kWh. Check whether the project is new or a retrofit, AC or DC coupling, voltage and BMS, charge and discharge power, phases, backup, communications, scalability and warranty. Plug & Play Energy checks each configuration against real project data and current documentation.

Over 20 years of experienceProfessional distributionSizing and commissioning support
No results found for 'co´n'. Showing results for 'con'.
Sigenergy SigenStor BAT 10 (9kWh) (11130012)
• Capacity: 9kWh, full discharge for maximum efficiency.
• Modular and stackable: Up to 6 modules per stack, scalable to 54kWh.
• Quick installation: Self-pluggable connectors, commissioning in minutes.
• Smart integration: Compatible with SigenStor EC inverters and mySigen app.

Price valid for deliveries until 31/12/2026. From 01/01/2027, due to the manufacturer's price list update, the price will increase by up to 5%.
Sigenergy SigenStack BAT 12 (12kWh) (11130014)
• High density: 12kWh/module, up to 253kWh/system
• Safety: IP66, fire suppression and thermal cell control
• Compatible and scalable: CAN integration with Sigenergy inverters, 4‑21 modules
• Quick installation: Floor mounting, air cooling, simple commissioning

Price valid for deliveries until 31/12/2026. From 01/01/2027, due to the manufacturer's price list update, the price will increase by up to 5%.
Sigenergy SigenStor BAT 6 (6kWh) (11130018)
• Capacity: 6kWh.
• Modular and stackable: Up to 6 modules per stack, scalable up to 36kWh.
• Quick installation: Self-pluggable connectors, commissioning in minutes.
• Smart integration: Compatible with SigenStor EC inverters and mySigen app.

Price valid for deliveries until 31/12/2026. From 01/01/2027, due to the manufacturer's price list update, the price will increase by up to 5%.
Only 7 Units left in stock.
Sigenergy SigenStor BAT 5 (5kWh) (11130002)
• Capacity: 5kWh.
• Modular and stackable: Up to 6 modules per stack, scalable up to 30kWh.
• Quick installation: Self-pluggable connectors, commissioning in minutes.
• Smart integration: Compatible with SigenStor EC inverters and mySigen app.
Only 2 Units left in stock.
Sigenergy SigenStack Cover (11180003)
The SigenStack cover serves as a protection for the battery modules inside the tower. Its main function is to safeguard the modules from external elements such as dust, humidity, and adverse environmental conditions, helping to prolong the useful life of the system and maintain the safety of the installation.
Sigenergy SigenStack Base MAIN-0,5C (11180002)
• Modular compatibility: Supports up to 5 SigenStack 0.5C modules
• Stackable design: Compact (770 × 195 × 363mm) and easy to install
• Integrated connectivity: Power and communication interfaces included
• IP66 rating: Dust and water resistant
Sigenergy SigenStack BC M2-1C-BST (11140002)
SigenStack Battery Controller M1 - 1C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.
Sigenergy SigenStack Base MAIN-1C (11180006)
• SigenStack Tower Master Controller – coordinates and manages all battery modules
• Optimizes charging, discharging and balance between modules for efficiency and useful life
• Maximum capacity managed per tower: 252kWh
Pylontech US3000 48V (3.6 kWh)
Voltage 48 V (45….53.5 Vdc)
Available power 90% (3.2kW)
Recommended discharge 37 A (1.7 kW)
Maximum discharge 74 A (3.5 kW)
Can-Bus and RS485 connection
Compatible with Victron and Solis
> 6000 life cycles @ 25ºC (15 years)
Dimensions: 442mm x 420mm x 132mm
Weight: 32kg.
Only 1 Units left in stock.
TCC-CAN Ultra 175
The TCC-CAN control module for the eBick Ultra 175 modular battery from Cegasa.
The BMS, through CAN communication, allows you to send the most relevant battery data such as SOC, temperature, alarms, current and voltage during charging and discharging, among others. In addition, with the eViewer App, through a Bluetooth connection, it allows you to view the module parameters such as battery SOC, cycles and bus voltage, among others.
Only 1 Units left in stock.
Sigenergy SigenStack BC M2-0.5C (11140001)
SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.
Cegasa eBick Ultra 175 -48280M (13.4kWh)
The eBick Ultra 175 battery is Cegasa's answer to installers looking for a pre-installed and self-managing battery, “plug and play”.
It is ideal for replacing lead batteries in existing installations, as well as for new ones.
self-consumption and off-grid installations with needs between 13 and 54 KWh.
The eBick Ultra 175, offering a degree of protection IP30, is stackable up to 2 heights and up to 8 parallel connections in controlled conditions for communication.
Only 3 Units left in stock.
Atmoce AC Connection Base for M‑ELV BattBank 16 kWh
Atmoce AC connection base for M‑ELV BattBank 16 kWh in commercial and industrial applications.
Atmoce Domo Kit Autoconsumo - Edición Especial Domo Electra (7kWh)
DomoAtmoce: Atmoce 7kWh Self-Consumption Kit - Domo Electra Special Edition
SolisStorage IntelliHome 5kWh - Batería de baja tensión IP66
Wall-mounted battery 5kWh
Product code: 2607090001
20-foot container capacity: 210 units
40 foot container capacity: 420 units
SolisStorage IntelliHome 10kWh - Batería de baja tensión IP66
Wall-mounted battery 10kWh
Product code: 2607090002
20-foot container capacity: 84 units
40-foot container capacity: 174 units
Only 7 Units left in stock.
Decision guide

Which battery fits the project

Project typeArchitecture to assessData to verify
Project typeNew residential systemArchitecture to assessAC or DC depending on ecosystem, functions and planned expansion.Data to verifyConsumption, PV generation, phases, power, battery, BMS and backup loads.
Project typeRetrofit of existing PVArchitecture to assessAC coupling or explicitly documented DC expansion.Data to verifyExact inverter model, voltage, BMS, firmware, metering, export and protection.
Project typeCommercial and industrialArchitecture to assessBESS with EMS according to operating goal and load profile.Data to verifyLoad curve, power, goal, space, grid, protection and control strategy.
Project typeOff-grid or critical loadsArchitecture to assessComplete generation, storage, control and backup system.Data to verifyAutonomy, peaks, simultaneity, generator, reserve, temperature and failure modes.

Is an AC or DC battery better?

It depends on the project. AC coupling often simplifies retrofits and separates ecosystems; DC can provide direct integration in new or hybrid systems. Exact compatibility and losses must be checked using the complete design.

How many kWh of battery does a system need?

Calculate it using hourly consumption and generation, the goal, autonomy, power, depth of discharge and losses. Monthly consumption alone is not enough for correct sizing.

Must the battery use the same brand as the inverter?

Not necessarily. DC requires documented compatibility between inverter, battery and BMS. AC may allow electrical coexistence, but this does not imply functional integration: metering, control, export and backup must be validated.

What distinguishes a C&I BESS from a home battery?

Not just capacity. C&I projects depend on power, load profile, EMS, grid connection, protection, space, operation, maintenance and the economic or operating goal. They require a specific study.

Size the system before quoting

Send us the technical data and we will help define power, capacity, architecture and auxiliary equipment.

Updated 10 September 2026. Final selection is validated against current documentation and real project data.

WhatsApp