Tu tienda de energía solar

A power meter transmits the measured amount of power to the SolarLog for analysis. It serves as a consumption meter, showing a comparison of produced and consumed power. It can be configured to operate with the SolarLog in three different modes:
- Measuring energy consumption for optimal utilization of the power generated.
- Measuring the total amount of energy that has been fed into the grid.
- Measuring the energy production of inverters that are not directly managed by SolarLog.

Energy Meter single-phase 100 A maximum.
The Energy Meter can be used for these things:
1. grid meter, and used as a control input for an ESS System (1).
2. Measuring the output of a photovoltaic inverter.
3. Measuring the output of an AC generator set.
The meter is connected to the Color Control GX. There are two options for its wiring:
1. direct connection, using the RS485 to USB interface with a 1.8 m long cable, or the 5.0 m long cable.
2. Wireless connection via Zigbee

The Victron EM24 Ethernet is a standard device for measuring the power and energy of a three-phase application, for example in the distribution box or for measuring the output of a PV inverter, an AC generator or an inverter or inverter/charger.

Control center and energy manager via Ethernet, including Energy Meter.

Interfaz para conectar productos Victron al ordenador.

Charge Controller Victron Energy SmartSolar MPPT 150/60

The Victron UTP RJ45 Cable 1.8m is a cable for connecting the Phoenix Inverter Control, the VE Interface MK3-USB and the VE.Bus connections between multiple VE.Bus and GX devices.

For simple single-parallel or series-parallel connection of photovoltaic modules.

Three-phase bidirectional meter.
Nominal voltage 230 V/400 V
Frequency 50 Hz/±5 %.
Nominal/limit current per phase conductor 5 A/63 A (>63 A combined with external current transformers)
Starting current <25 mA
Connection cross-section From 10 mm² to 16 mm² 1) (for 63 A protection)

El Color Control GX es el centro de comunicaciones de su instalación. Ofrece información en tiempo real de un vistazo y le permite controlar todos los productos conectados a él. Podrá controlar todo el sistema - desde prácticamente cualquier parte del mundo - accediendo a su Color Control GX mediante nuestro Portal Victron Remote Management (VRM), de uso gratuito.

Fuente de alimentación para Cluster Controller, Data Manager, CON Gateway e Inverter Manager.

3000VA 48V 230V IP22 (Incluye cargador 35A y dispositivo GX con pantalla)

Smart Meter TS 65A-3; for recording energy consumption, three-phase, direct metering

Registrador de datos con sensores de temepratura del módulo y radiación

Conexión para gestión de energía para SolarLog Base

The Victron RS485 to USB interface is a cable with adapter for communicating RS485 devices such as energy meters to other USB devices such as Cerbo, Color Control, etc.

Huawei 10KTL-M1 HC

Maximum input voltage: 1100V
Maximum input current per MPPT: 11 A
DC reverse polarity / AC overcurrent / short circuit protection, anti-islanding
Smart Dongle - WLAN-FE Included
Protection: IP65
Maximum efficiency: 98.6%
10 year warranty

Modular electric energy meter that displays power (kWh, kVArh and kVA) and other measurements directly on its backlit LCD display.
It is designed for three-phase load metering with connection via CT and is suitable for applications up to 12000 A.

Huawei 5KTL-M1 HC

Smart Dongle - WLAN-FE Included
Maximum input voltage: 1,100 V
Maximum input current per MPPT: 13.5A
DC reverse polarity / AC overcurrent / short circuit protection, anti-islanding
Protection: IP65
Maximum efficiency: 98.4%
10 year warranty

- Rango de temperatura: -40 ° C a +85 ° C (-40 ° F a + 158 ° F)
- Clase de protección: IP68, NEMA 3R
- Longitud del cable de salida: 1.2 m
- Conector: MC4 / MC4 conectable
- Tensión máxima del sistema: 1000 V.
- Rango de voltaje: 16-90 V
- Corriente de entrada máxima (IMax.): 12A
- Tipo de comunicación: conexión de radio

Se requiere Cloud Connect con TAP de Tigo para el monitoreo.