Your solar energy shop

Atmoce MS-7K-U Lithium Battery (7kWh) Universal AC-Coupling storage solution suitable for outdoors (IP66). Compatible with any inverter (single-phase/three-phase) to hybridize new or existing installations. Total optimization with Atmoce microinverters.
Guarantee: 15 years.
Capacity: 7 kWh.

Product model: DL5.0C (5kWh)
Battery type: LiFePO4
Rated battery power: 5 kWh
Protection grade: IP20
Expansion: Up to 50 units in parallel
Life cycle: ≥8000 cycles / 7 years
Net weight: 49.9kg

Model: Huawei LUNA2000-5KW-C0
Type: BMS/DC-DC module
Function: Control, protection and communication of the LUNA2000 S0 system
Application: Huawei energy storage management.

The SigenStack cover serves as a protection for the battery modules inside the tower. Its main function is to safeguard the modules from external elements such as dust, humidity, and adverse environmental conditions, helping to prolong the useful life of the system and maintain the safety of the installation.

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates the PV inverter, battery power conversion system (PCS), EV DC charger for electric vehicles, battery pack and energy management system (EMS).

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates PV inverter, battery power conversion system (PCS), DC EV charger for electric vehicles, battery pack and energy management system (EMS).

Kit with Gateway (for communications) and toroidals for retrofit measurement.

• SUB-0.5C Base: Supports charging/discharging up to 0.5C.
• Modular and stackable: Supports up to 7 battery modules per stack.
• IP66 protection: Dust and water resistant.

Product model: Powerbox G2 (10.24 kWh)
Battery type: LiFePO4
Rated battery power: 10.24 kWh
Protection grade: IP65
Expansion: Up to 50 units in parallel
Life cycle: ≥8000 cycles / 10 years
Net weight: 115kg
Compatible inverters: Solis, Victron, Deye, SAJ, Voltronic, Growatt, APS, Goodwe.

Atmoce Kit CT (1-Phase) - PV CT, Grid CT, Battery CT

Atmoce Kit CT (3-Phase) - PV CT, Grid CT, Battery CT

Three-phase

• SUB-1C Base: Supports charging/discharging up to 1C.
• Modular and stackable: Supports up to 7 battery modules per stack.
• IP66 protection: Dust and water resistant.

SigenStack Battery Controller M1 - 1C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.

• SigenStack Tower Master Controller – coordinates and manages all battery modules
• Optimizes charging, discharging and balance between modules for efficiency and useful life
• Maximum capacity managed per tower: 252kWh

35A MPPT charge regulator for 12, 24, 36 and 48 volt battery systems and up to 150V photovoltaic field, from the Victron Energy brand, SmartSolar MPPT 150/35 model.

The TCC-CAN control module for the eBick Ultra 175 modular battery from Cegasa.
The BMS, through CAN communication, allows you to send the most relevant battery data such as SOC, temperature, alarms, current and voltage during charging and discharging, among others. In addition, with the eViewer App, through a Bluetooth connection, it allows you to view the module parameters such as battery SOC, cycles and bus voltage, among others.

Product model: BF100 (100 kWh)
System Type: Outdoor DC Battery Cabinet
Cabinet capacity: 100 kWh
Cooling: Smart Air
Installation: Outdoor
Application: C&I energy storage (according to project design).

85A MPPT solar charge regulator for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, from the Victron Energy brand, model SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw)

Solution model: Solis + Dyness 50kW/100kWh
Inverter: Solis S6-EH3P50K-H
Inverter rated power: 50 kW three-phase
Recommended PV power: Up to 100 kW
Battery: Dyness BF100
Useful capacity: 100 kWh
Battery technology: LiFePO4
Application: Commercial/industrial storage.