Atmoce MS-7K-U Lithium Battery (7kWh) Universal AC-Coupling storage solution suitable for outdoors (IP66). Compatible with any inverter (single-phase/three-phase) to hybridize new or existing installations. Total optimization with Atmoce microinverters.
Guarantee: 15 years.
Capacity: 7 kWh.

Product model: DL5.0C (5kWh)
Battery type: LiFePO4
Rated battery power: 5 kWh
Protection grade: IP20
Expansion: Up to 50 units in parallel
Life cycle: ≥8000 cycles / 7 years
Net weight: 49.9kg

The SigenStack cover serves as a protection for the battery modules inside the tower. Its main function is to safeguard the modules from external elements such as dust, humidity, and adverse environmental conditions, helping to prolong the useful life of the system and maintain the safety of the installation.

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates the PV inverter, battery power conversion system (PCS), EV DC charger for electric vehicles, battery pack and energy management system (EMS).

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates PV inverter, battery power conversion system (PCS), DC EV charger for electric vehicles, battery pack and energy management system (EMS).

• SUB-0.5C Base: Supports charging/discharging up to 0.5C.
• Modular and stackable: Supports up to 7 battery modules per stack.
• IP66 protection: Dust and water resistant.

Product model: Powerbox G2 (10.24 kWh)
Battery type: LiFePO4
Rated battery power: 10.24 kWh
Protection grade: IP65
Expansion: Up to 50 units in parallel
Life cycle: ≥8000 cycles / 10 years
Net weight: 115kg
Compatible inverters: Solis, Victron, Deye, SAJ, Voltronic, Growatt, APS, Goodwe.

• SUB-1C Base: Supports charging/discharging up to 1C.
• Modular and stackable: Supports up to 7 battery modules per stack.
• IP66 protection: Dust and water resistant.

SigenStack Battery Controller M1 - 1C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.

• SigenStack Tower Master Controller – coordinates and manages all battery modules
• Optimizes charging, discharging and balance between modules for efficiency and useful life
• Maximum capacity managed per tower: 252kWh

The TCC-CAN control module for the eBick Ultra 175 modular battery from Cegasa.
The BMS, through CAN communication, allows you to send the most relevant battery data such as SOC, temperature, alarms, current and voltage during charging and discharging, among others. In addition, with the eViewer App, through a Bluetooth connection, it allows you to view the module parameters such as battery SOC, cycles and bus voltage, among others.

Product model: BF100 (100 kWh)
System Type: Outdoor DC Battery Cabinet
Cabinet capacity: 100 kWh
Cooling: Smart Air
Installation: Outdoor
Application: C&I energy storage (according to project design).

Solution model: Solis + Dyness 50kW/100kWh
Inverter: Solis S6-EH3P50K-H
Inverter rated power: 50 kW three-phase
Recommended PV power: Up to 100 kW
Battery: Dyness BF100
Useful capacity: 100 kWh
Battery technology: LiFePO4
Application: Commercial/industrial storage.

SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.

The eBick Ultra 175 battery is Cegasa's answer to installers looking for a pre-installed and self-managing battery, “plug and play”.
It is ideal for replacing lead batteries in existing installations, as well as for new ones.
self-consumption and off-grid installations with needs between 13 and 54 KWh.
The eBick Ultra 175, offering a degree of protection IP30, is stackable up to 2 heights and up to 8 parallel connections in controlled conditions for communication.

Solis S6-EH3P50K-H 50 kW three-phase hybrid inverter for 150 to 800 V high-voltage batteries, with dual battery ports, backup output and 4 MPPTs / 8 PV inputs. Dimensions: 530×880×290 mm. Weight: 73 kg. IP66 protection and 5-year warranty.

Solis S6-EH3P30K-H 30 kW three-phase hybrid inverter for 150 to 800 V high-voltage batteries, with dual battery ports, backup output and 3 MPPTs / 6 PV inputs. Dimensions: 530×880×290 mm. Weight: 73 kg. IP66 protection and 5-year warranty.

Solis S6-EH3P40K-H 40 kW three-phase hybrid inverter for 150 to 800 V high-voltage batteries, with dual battery ports, backup output and 4 MPPTs / 8 PV inputs. Dimensions: 530×880×290 mm. Weight: 73 kg. IP66 protection and 5-year warranty.

Solis S6-EA1P6K-L 6 kW bidirectional AC-coupled inverter for adding 40 to 60 V low-voltage battery storage to grid-connected installations. It includes a single-phase meter and supports up to 125 A charge and discharge current. It has no direct PV input. Dimensions: 440×465×192 mm. Weight: 19.9 kg. IP66 protection and 10-year warranty.

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates PV inverter, battery power conversion system (PCS), DC EV charger for electric vehicles, battery pack and energy management system (EMS).