Temperature range - 40 °C to + 90 °C (for fixed and flexibleinstallation)
Max. Temperature at conductor + 120°C (20.000 h, 50 % residual elongation)
Rated voltage U0/U AC 1,0 / 1,0 kV DC 1,5 / 1,5 kV
Resistance weather-resistant and UV-resistance

The BENNING PV 2 is a professional measuring device designed for the safe, accurate and efficient verification of photovoltaic installations, both in direct current (DC) and alternating current (AC). Ideal for installers, maintenance technicians and EPC companies, this device allows fundamental tests to be carried out in accordance with the IEC 62446 standard.

What is it used for?
This instrument is essential for:

Verifying the performance and safety of photovoltaic strings and inverters.

Measuring open-circuit voltage and current (Voc, Isc).

Detecting insulation faults between conductors and earth (insulation test up to 1000 V DC).

Checking the polarity, continuity and general condition of the panels.

Performing post-installation technical audits or preventive maintenance.

Typical applications
Residential, commercial and industrial solar installations.

Verification of strings before connection to the inverter.

Certification of new systems in accordance with regulations.

Diagnosis of low performance or faults in the field.

Key advantages:
Fast and accurate measurement at the touch of a button.

Compatible with modules up to 1000 V DC.

Data storage and PC download function for reports.

Includes a test box and secure connection cables.

Portable, robust design, ready for outdoor use.

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / U AC1.0 / 1.0 kV DC 1.5 / 1.5 kV
Weather and UV resistance

Măsurare indirectă.

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, Victron Energy SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw).

Control center and energy manager via Ethernet, including Energy Meter.

Victron solar charge controller with maximum power point tracking MPPT SmartSolar 100/30. Victron SmartSolar solar charge controllers have integrated Bluetooth with which you can configure, monitor, and update the controller with your SmartPhone, tablet or other Apple or Android device.

Smart Meter TS 65A-3; for recording energy consumption, three-phase, direct metering

Modular electric energy meter that displays power (kWh, kVArh and kVA) and other measurements directly on its backlit LCD display.
It is designed for three-phase load metering with connection via CT and is suitable for applications up to 12000 A.

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

Temperature range -40 ° C to + 90 ° C
Max. conductor temperature + 120 ° C (20,000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

Con fuente de alimentación externa de 12 a 28 VCC, cable de conexión de 3 m, microprocesador integrado, compensación de temperatura activa, medición integrada de la temperatura de la célula solar calibrada y una interfaz RS485, protocolo: MODBUS, con sensor de temperatura ambiente externo conectado permanentemente (Pt1000, longitud del cable 3 m)

15A MPPT solar charge controller for 12 and 24 volt battery systems and up to 75V photovoltaic field, Victron Energy brand SmartSolar MPPT 75/15 model.

Senzor de temperatură ambientală pentru conectarea la Si-RS485TC-2T-v, Pt1000 clasa A, incl. 3 m cablu și conector (IP67)

Energy meters are typically used in an energy storage system, to measure the power and energy of the entire application in the distribution box and minimize the import or export of energy to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM gateway.
ET340 (RS485 - for 3-phase max. 65 A)

For simple single-parallel or series-parallel connection of photovoltaic modules.

The Victron EM24 Ethernet is a standard device for measuring the power and energy of a three-phase application, for example in the distribution box or for measuring the output of a PV inverter, an AC generator or an inverter or inverter/charger.

For simple single-parallel or series-parallel connection of photovoltaic modules.

MC4 BULKHEAD CONNECTOR 4-6MM²
MC4 surface mount connectors form the interface between an inverter or distributor housing and a string.

MC4 bulkhead connector 4-6mm²
MC4 surface mount connectors form the interface between an inverter housing or PV panel.