Openable toroidal IAP 1000/5

Openable transformers measuring 1500/5

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

A power meter transmits the power measurement quantity to the SolarLog for analysis. It serves as a consumption meter, showing a comparison of the power produced and consumed. It can be configured to operate with the SolarLog in three different modes:
- Measurement of energy consumption for optimal use of the generated power.
- Measure the total amount of energy that has been poured into the grid.
- Measurement of energy production of inverters that are not managed directly by SolarLog.

Bidirectional three-phase meter.
Rated voltage 230 V/400 V
Frequency 50 Hz/±5%
Rated current/limit per phase conductor 5 A/63 A (>63 A combined with external current transformers)
Starting current <25mA
Connection section 10 mm² to 16 mm² 1) (for 63 A protection)

Victron 275A disconnector

Compact equipment for decentralized systems and large-scale photovoltaic systems due to its high power density. Output voltage 690V

“Active cooling” with speed-controlled fans ensure optimal
optimal cooling with lower energy consumption, maximizes production
due to temperature reduction

Max power of PV generator: 360 kWp
Max input voltage 1500V
Max input current/Max short circuit current: 180 A/325 A
Number of MPP followers: 1
Certificate for Spain and Portugal
5 year warranty

Stops power losses
Prevents the PID effect
Measures insulation resistance.
IP56
MC4 connection
Output for 1 MPPT, chains up to 1000V with common negative
1 relay output

35A MPPT charge regulator for 12, 24, 36 and 48 volt battery systems and up to 150V photovoltaic field, from the Victron Energy brand, SmartSolar MPPT 150/35 model.

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / U AC1.0 / 1.0 kV DC 1.5 / 1.5 kV
Weather and UV resistance

Rated power: 110000W
12 independent MPP supporters.
Without display.
IP65.
Max power Photovoltaic generator:165000 Wp STC
Max input voltage 1100 V
MPP tracker voltage range/rated input voltage: 500 V to 800 V/ 585 V
Min/Start Input Voltage200V/250V
Max current input/per MPP follower: 26 A/40 A
Number of independent MPP follower entries/Strings per MPP follower entry: 12/2

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / U AC1.0 / 1.0 kV DC 1.5 / 1.5 kV
Weather and UV resistance

85A MPPT solar charge regulator for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, from the Victron Energy brand, model SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw)

Control center and energy manager via Ethernet, includes Energy Meter.

SmartSolar MPPT 150/70-TR VE.CAN

Smart Meter TS 65A-3; for recording energy consumption, three-phase, direct measurement

Modular electric energy meter that displays power (kWh, kVArh and kVA) and other measurements directly on its backlit LCD screen.
It has been designed for three-phase load measurement with connection via CT and is suitable for applications up to 12000 A.

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

Rango de temperatura de -40 ° C a + 90 ° C
Máx. Temperatura en el conductor + 120 ° C (20.000 h)
Nominal voltage U0 / UAC1.0 / 1.0 kVDC 1.5 / 1.5 kV
Weather and UV resistance

With external 12 to 28 VDC power supply, 3 m connection cable, integrated microprocessor, active temperature compensation, integrated measurement of calibrated solar cell temperature and an RS485 interface, protocol: MODBUS, with permanently connected external ambient temperature sensor (Pt1000, cable length 3 m)