With external 12 to 28 VDC power supply, 3 m connection cable, integrated microprocessor, active temperature compensation, integrated measurement of calibrated solar cell temperature and an RS485 interface, protocol: MODBUS, with permanently connected external ambient temperature sensor (Pt1000, cable length 3 m)

Ambient temperature sensor to connect to Si-RS485TC-2T-v, Pt1000 class A, incl. 3 m cable and plug-in connector (IP67)

SUNMETER PRO with solar cell LAMINATED with SOLAR GLASS
and with the same elements as in the photovoltaic module.
Class A; Modbus RS485 output, Prec irradiance ± 2.1%, Prec temp. ±0.5°C.
Case in anodized aluminum. With mounting bracket and temperature
probe input Accuracy 2,%.
Recalibration service after 18/12 months included.

SUNMETER PRO WIND with LAMINATED solar cell with
SOLAR GLASS and with the same elements as in PV
module. Class A; Modbus RS485 output, Irradiance
Previous ± 2.1%, Previous Temp. ± 0.5°C, wind speed. Houses in
anodized aluminum. With mounting bracket and
Temperature probe input. Accuracy 2.%. service
recalibration after 12/18 months included.

For communication with a pulse anemometer it is necessary:
- 2 x M12 Male 8 pin
- 1 x M12 Y connector for Soluzione anemometer
- 1 x M12 Female 8 pin output to datalogger

Temperature sensor by modulului will increase the temperature of the solar panourilor spate in Celsius (°C) folosind or PT1000 probe. Probe, folosită pentru măsurarea temperaturii părții din spate a modulului, este plasată între două foi din spate cu lie EVA. This temperature sensor module is compatible with the bottom of the SEVEN temperature sensor.

Main advantage of the sensor is this structure, which is similar to the part in the spate of the photovoltaic module. Mainly, the transfer behavior of heat to the sensor and the photovoltaic module is similar, this is the case.

Part number 3S-MT-PT1000
Senzor tip PT1000
Temperature range -40°C to +85°C
Accuracy ±0.1°C
Rezoluție 0.1°C
Ieșire PT1000
Electrical connection LIYYC11Y PUR Cable of 3 m, resistant to UV rays and intemperii
Operating temperature -40°C to +85°C
Sensor capacity size Ø 35mm x 3mm
Greutate 77 gr
Evaluate IP IP 67
Material capac senzor Foaie din spate laminată (EVA – Tedlar)
Mounting method Autocolant 3m pe spatele panoului
Standardul Class A conform to IEC 60751:2022

Temperature Sensor Module, PT1000 with output
analog,
Measuring range: -40°C to +85°C
Power supply 12...30 V DC
4-20mA output
Accuracy: ±0.1°C
Housing: Plastic housing with aluminum plate, H x
W x L: 12mm x 50mm x 50mm
3 m PUR cable, UV and weather resistant
The Class A Standard according to IEC 60751:2022

Solar-log compatible

It is a two-axis static ultrasonic anemometer used to make accurate measurements of wind speed and direction under all environmental conditions. It is capable of measuring wind speeds of up to 85 m/s without losing precision.

It has a heating option for quick defrosting. A model with an anodized aluminum alloy casing with anti-corrosion coating is available. This feature allows the instrument to be used even in particularly aggressive environments. The anemometer meets the requirements of MIL-STD-810G Method 509.6 (salt spray corrosion test). Its high immunity to electromagnetic interference makes it suitable for measurements in electrically noisy environments.

All measured weather data is transferred to the data loggers and receiving units via a 2-wire RS485 bus with Modbus RTU protocol. This sensor is also equipped with two analog outputs for wind speed and direction, factory configurable within 4-20 mA (standard), 0…1 V, 0…5 V or 0…10 V (to be specified when ordering).

Modbus irradiance sensors are designed for professional use in industrial, commercial and photovoltaic plants.

The irradiance sensor works as a concentrator for several sensors. All measured weather data is transmitted to the data loggers and receiving units via a 2-wire RS485 bus with Modbus RTU protocol.

- Class A compliance.
- Quick and easy installation.
- Similar structure with photovoltaic panels.
- Free software update.
- Compatible with SunSpec (for Modbus RTU).
- Remote configuration service.
- 5 years warranty.