Tu tienda de energía solar

High performance module with 605W and efficiency of 23.8%.
Dimensions: 2278*1134*35mm
Maximum System Voltage: 1500V
Current Limit: 25A
144 cells
IP68 Protection
15 years product warranty
30 years linear performance warranty

Huawei Smart Power Sensor DTSU666-H (3-Ph).
Valid if cable section doesn't exceeds 95 mm2 and there's not a higher intensity of 250 A.

The SigenStack cover serves as protection for the battery modules inside the tower. Its main function is to safeguard the modules from external elements such as dust, moisture, and adverse environmental conditions, helping to extend the system's lifespan and maintain installation safety.

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates the PV inverter, battery power conversion system (PCS), EV DC charger for electric vehicles, battery pack and energy management system (EMS).

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates the PV inverter, battery power conversion system (PCS), EV DC charger for electric vehicles, battery pack and energy management system (EMS).

The TCC-CAN control module for Cegasa's eBick Ultra 175 modular battery.
The BMS, through CAN communication, allows sending the most relevant battery data such as SOC, temperature, alarms, current and voltage both in charge and discharge, among others. In addition, with the eViewer App, via Bluetooth connection, it allows to visualize the module parameters such as battery SOC, cycles and bus voltage, among others.

The eBick Ultra 175 is Cegasa's answer to installers looking for a pre-installed, self-managing, plug-and-play battery.
It is ideal for replacing lead-acid batteries in existing installations, as well as for new self-consumption and off-grid
off-grid and self-consumption installations with requirements between 13 and 54 KWh.
The eBick Ultra 175, offering an IP30 degree of protection, is stackable up to 2 heights and up to 8 parallel connections in controlled conditions for communication.

• ezShade 2.0 solar canopy (2 spaces) in AL6005-T5 aluminum, SUS304 fasteners, certified, wind-resistant up to 50 m/s.
• Integrated drainage with guides and gutters, waterproof.
• Dimensions: 5,500 mm span, 5° tilt, minimum free height 2,100 mm.
• Capacity: up to 15.3 kWp of 510 Wp (3P x 10) or 11.8 kWp of 590 Wp (2P x 10).

Solis-S5-GR3P10K (10 kW - 2 MPPT)

1100V Three Phase Inverter
Features a maximum input current of 32A
Certified 0 injection
Protection against overvoltage, short circuit, output overcurrent and against DC reverse polarity
Standard 5-year warranty extendable up to 20 years

Solis-3P-Meter-CT*3 (indirect measurement)

Preconfigured and ready to communicate with all three-phase Solis inverters
Indirect measurement wattmeter, installation without the need to modify the customer's installation
DIN35 rail mounting
LCD screen for real-time display of measurements
Open-core toroids included with measurement capacity per phase of up to 150A and 5 meters of cable
Includes 10m RS485 cable with connector for Solis inverters as standard
Ability to use other toroids with a 5 amp secondary simply by setting the transformation ratio

Solis 3P20kW 4G Three Phase Dual MPPT DC

1100V Three Phase Inverter
Features a maximum input current of 32A
Certified 0 injection
Protection against overvoltage, short circuit, output overcurrent and against DC reverse polarity
Standard 5-year warranty extendable up to 20 years

Features:

Indirect measurement wattmeter, installation without the need to modify the customer's installation.
DIN35 rail mounting
LCD display for real time display of measurements
10m RS485 cable with Solis inverter connector included as standard.
Ability to use other toroidals with secondary at 5 amps simply by setting the transformation ratio

Include:

Izolație interioară completă cu vată de stâncă de înaltă densitate

Acoperire interioară cu panouri OSB

Sistem de aer condiționat interior: 2 x 5kW aer condiționat split inverter

Container maritim de 40 de picioare adaptat pentru aplicații de stocare a energiei de aproximativ 1 MWh, conceput pentru a garanta condiții optime de siguranță, izolare termică și ventilație.

Interiorul are izolație completă folosind vată de stâncă de înaltă densitate, oferind protecție termică și acustică și este acoperit cu panouri OSB pentru o durabilitate și un finisaj tehnic mai mari.

Sistemul de aer condiționat este format din unități de aer condiționat split inverter de 5 kW și un extractor montat pe perete cu intrare pasivă a aerului, asigurând un control termic eficient în medii cu sarcină termică ridicată.

Include un tablou electric de protecție AC trifazat, echipat cu întreruptoare, întreruptoare, diferențiale și protecție la supratensiune, dimensionat pentru până la 102 baterii de 12kWh.

Setul este pregătit pentru integrarea sistemelor de baterii, invertoare și componente auxiliare, oferind o soluție de instalare modulară, sigură și rapidă pentru proiecte fotovoltaice și industriale de scară medie.

Modul fotovoltaic LONGi 645W Hi-MOX10 LR7-72HVH - 15Y. Rama argintie. . 15 ani garanție pentru produs și 25 de ani de producție.
Putere 645W
Tip modul: Monofacial 144 Cells

Huawei Smart Power Sensor DTSU666-H (3-Ph).
Valid if cable section doesn't exceeds 95 mm2 and there's not a higher intensity of 250 A.

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates the PV inverter, battery power conversion system (PCS), EV DC charger for electric vehicles, battery pack and energy management system (EMS).