Tu tienda de energía solar

UMG 104, with a 500 MHz DSP (digital signal processor), is a fully fast and powerful network analyzer. The continuous analysis of the 8 channels with 20 kHz per channel allows the recording of the electrical parameters (more than 800 values), minimum and maximum values, the essential voltage quality values as harmonics (up to 40, each phase with the recognition of the address). On the basis of data that production failures can be avoided, concepts can be developed for example to reduce energy costs, the measures taken and with the UMG 104 the achieved improvements can be monitored and documented. Through modern communication architectures the recorded data is sent to a central location, centrally stored in efficient databases and available for further processing in an open architecture. The easy connection of an available building control system or SPS environment extends the areas of use of the UMG 104.

Victron solar charge controller with maximum power point tracking MPPT SmartSolar 100/50. Victron SmartSolar solar charge controllers have integrated Bluetooth with which you can configure, monitor, and update the controller with your SmartPhone, tablet or other Apple or Android device.

Victron solar charge controller with maximum power point tracking MPPT SmartSolar 100/30. Victron SmartSolar solar charge controllers have integrated Bluetooth with which you can configure, monitor, and update the controller with your SmartPhone, tablet or other Apple or Android device.

Like the MultiPlus, the VICTRON ENERGY Quattro is also a device consisting of an inverter and a charger. In addition, it supports two AC inputs and automatically connects to the active input. Its many features include a pure sine wave inverter, variable load, hybrid PowerAssist technology, plus multiple features for integration into different systems, such as three-phase or split-phase systems. .

A power meter transmits the measured amount of power to the SolarLog for analysis. It serves as a consumption meter, showing a comparison of produced and consumed power. It can be configured to operate with the SolarLog in three different modes:
- Measuring energy consumption for optimal utilization of the power generated.
- Measuring the total amount of energy that has been fed into the grid.
- Measuring the energy production of inverters that are not directly managed by SolarLog.

The Victron EM24 Ethernet is a standard device for measuring the power and energy of a three-phase application, for example in the distribution box or for measuring the output of a PV inverter, an AC generator or an inverter or inverter/charger.

Energy meters are typically used in an energy storage system, to measure the power and energy of the entire application in the distribution box and minimize the import or export of energy to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM gateway.
ET340 (RS485 - for 3-phase max. 65 A)

Export Manager 5G PLUS (For 3PH Sites)

Power export manager for three-phase systems.
Simultaneously monitors operating data from up to 20 inverters, saving on the cost of the monitoring system.
Supports simultaneous access of Solis inverters with different power ratings.
Rated voltage: 400 V,3/N/PE
Input voltage range: L to N: 320~480 V
Monitoring: via DLB- W (built-in).
Display: LCD smart meter (built-in)
Inverter communication via Modbus RS485

Solis 36kw 5G Three Phase QUAD MPPT DC

4MPPT triphasic power inverter (maximum 8 input chains)
Maximum input voltage: 1100V
MPPT voltage range: 200-1000V
Maximum input current: 26A
Protection against reverse polarity DC / curtcircuit / overcurrent of output and temperature

Huawei BMS (LUNA2000-5KW-C0 - DC/DC Module)
Advanced management system that is responsible for monitoring and controlling the batteries of the power module

The MultiPlus-II is a multifunctional inverter/charger with all the functions of the MultiPlus, plus an optional external current sensor that extends the PowerControl and PowerAssist functions up to 50 A and 100 A respectively.
The MultiPlus-II is ideal for professional use in marine, recreational boating, vehicle and off-grid land applications.

Export Manager 5G (Para sistemas trifásicos)

Energy export manager for three-phase systems.
Monitor power generation and load consumption at all times.
Input voltage: 175~519V (L-L)
Rated voltage: 3/N/PE, 230V / 400V
Monitoring via WiFi/4G/LAN Stick (Optional)
Communication via Modbus (RS485)

Solis 5G 110kW 3Ph Inverter, 10 MPPT

10 MPPT, 98.7% maximum efficiency
> 150% DC/AC ratio
High power tracking density 90 MPPT/MW
Compatible with bifacial modules
Maximum input voltage 1100 V
Communication:RS485, Optional: Wi-Fi, GPRS, PLC

Huawei FusionSolar Charger AC 7.4 - 7kW/32A

It has a Type 2 connection and is configurable in a range from 1.4kW to 7.4kW.
Possibility of dynamic load control based on the contracted power
Supported communication mode: WiFi, Ethernet, RFID, RS485
Rated Voltage: 230V
Charging power: 1.4kw to 7.4kw
Overcurrent and temperature protection

Compact equipment for decentralized systems and large-scale photovoltaic systems due to its high power density.

“Active cooling” with speed-controlled fans ensure optimal
optimal cooling with lower energy consumption, maximizes production
due to temperature reduction


Max power PV generator: 225000W
Max input voltage 1500V
Max input current/Max short circuit current: 180 A/325 A
Number of MPP followers: 1
Certificate for Spain and Portugal
5 year warranty

Compact equipment for decentralized systems and large-scale photovoltaic systems due to its high power density.

“Active cooling” with speed-controlled fans ensure optimal
optimal cooling with lower energy consumption, maximizes production
due to temperature reduction

Max power of PV generator: 360 kWp
Max input voltage 1500V
Max input current/Max short circuit current: 180 A/325 A
Number of MPP followers: 1
Certificate for Spain and Portugal
5 year warranty

• 1 % high-accuracy power detection for precise control
• 100 A single-phase direct connection with built-in CT
• Modbus RTU communication via RS485
• Supports export/import limitations and AI-ready

• 1 % high-accuracy power measurement for precise control of consumption, generation, and energy optimization
• Plug & play integration with Sigenergy systems via Modbus, no extra configuration needed
• Real-time monitoring with 100 ms data refresh for instantaneous response
• Versatile installation: direct connection up to 100 A or with external current transformers (CTs)