Huawei 4KTL-L1

Smart Dongle - WLAN Included
Maximum input voltage: 600V
Maximum intensity by MPPT: 12.5A
Anti-islanding / reverse polarity protection DC / temperature / AC overcurrent, short circuit and overvoltage
Maximum efficiency:98%
Protection: IP65
10 year warranty

Huawei 5KTL-L1

Smart Dongle - WLAN-FE Included
Maximum input voltage: 1,100 V
Maximum input current per MPPT: 13.5A
DC reverse polarity / AC overcurrent / short circuit protection, anti-islanding
Protection: IP65
Maximum efficiency: 98.4%
10 year warranty

Huawei DDSU666-H (1-Ph)

Indirect measurement wattmeter (ampere clamp included)
It allows measuring the consumption of our electrical network.
With an RS485 communication interface to communicate with Huawei inverters
3 years warranty.

Huawei Smart Power Sensor DTSU666-H (3-Ph).
Valid if cable section doesn't exceeds 95 mm2 and there's not a higher intensity of 250 A.

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates the PV inverter, battery power conversion system (PCS), EV DC charger for electric vehicles, battery pack and energy management system (EMS).

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates the PV inverter, battery power conversion system (PCS), EV DC charger for electric vehicles, battery pack and energy management system (EMS).

Solis-100K-5G-DC (10 MPPT)

Maximum input voltage: 1100V
Maximum input current: 10*26A
Maximum efficiency: 98.7%
DC reverse polarity/temperature/short circuit and surge protection
Incorporates type II surge protection in AC and DC
5-year warranty (extendable up to 20 years)

Power Meter, DTSU666-HW/YDS60-80
Direct reading up to 80A
Supports indirect reading with CT x/5A (not included)

inteligent:
- Monitorizarea nivelului șirurilor
Eficient:
- Eficienta maxima 98,7%
Asigurare:
- Design fără fuzibil
Fiabil:
- Descărcătoare de supratensiune de tip II DC și AC
Tensiune maximă de intrare 1100
Curent maxim de intrare 120
Nu. Adepți MPP 4
Model fara transformator, fara display
Eficiență europeană 98.0000
L*L*H (mm) 530 * 640 * 270
Putere nominală AC 50.0000
Putere AC maximă 55.0000
Eficienta maxima 98.5000
Interval MPP 200 - 1000
Max. serie de numere: 8
Protectie IP66
Greutate (kg): 49,00

20 ani garanție produs
producție europeană
2094 mm x 1038 mm x 35 mm

Stops power losses
Prevents PID effect
Measure insulation resistance.
IP56
MC4 connection
Output for 2 MPPT, chains up to 1000V with common negative
1 relay output

Modbus 3-phase current meter

HUAWEI Power meter DTSU666-FE smart meter. Only required in combination with the Huawei EV charging point SCharger in installations without PV inverters. Valid for three-phase and single-phase installations up to 100A - 3x CT 100A included.

Three-phase bidirectional meter.
Nominal voltage 230 V/400 V
Frequency 50 Hz/±5 %.
Nominal/limit current per phase conductor 5 A/63 A (>63 A combined with external current transformers)
Starting current <25 mA
Connection cross-section From 10 mm² to 16 mm² 1) (for 63 A protection)

Compact equipment for decentralized systems and large-scale photovoltaic systems due to its high power density.

“Active cooling” with speed-controlled fans ensure optimal
optimal cooling with lower energy consumption, maximizes production
due to temperature reduction

Max power of PV generator: 360 kWp
Max input voltage 1500V
Max input current/Max short circuit current: 180 A/325 A
Number of MPP followers: 1
Certificate for Spain and Portugal
5 year warranty

Stops power losses
Prevents PID effect
Measure insulation resistance.
IP56
MC4 connection
Output for 2 MPPT, chains up to 1000V with common negative
1 relay output

35A MPPT charge controller for battery systems of 12, 24, 36 and 48 volts and up to 150V photovoltaic field, Victron Energy brand SmartSolar MPPT 150/35.

The BENNING PV 2 is a professional measuring device designed for the safe, accurate and efficient verification of photovoltaic installations, both in direct current (DC) and alternating current (AC). Ideal for installers, maintenance technicians and EPC companies, this device allows fundamental tests to be carried out in accordance with the IEC 62446 standard.

What is it used for?
This instrument is essential for:

Verifying the performance and safety of photovoltaic strings and inverters.

Measuring open-circuit voltage and current (Voc, Isc).

Detecting insulation faults between conductors and earth (insulation test up to 1000 V DC).

Checking the polarity, continuity and general condition of the panels.

Performing post-installation technical audits or preventive maintenance.

Typical applications
Residential, commercial and industrial solar installations.

Verification of strings before connection to the inverter.

Certification of new systems in accordance with regulations.

Diagnosis of low performance or faults in the field.

Key advantages:
Fast and accurate measurement at the touch of a button.

Compatible with modules up to 1000 V DC.

Data storage and PC download function for reports.

Includes a test box and secure connection cables.

Portable, robust design, ready for outdoor use.

Potencia nominal: 110000W
12 seguidores MPP independientes.
Sin display.
IP 65.
Potencia máx. del generador fotovoltaico:165000 Wp STC
Tensión de entrada máx.1100 V
Rango de tensión del seguidor del MPP/tensión asignada de entrada: De 500 V a 800 V/ 585 V
Tensión de entrada mín./de inicio200 V/250 V
Corriente máx. de entrada/por seguidor del MPP: 26 A/40 A
Número de entradas de seguidores del MPP independientes/Strings por entrada de seguidores del MPP: 12/2

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, Victron Energy SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw).