Tu tienda de energía solar

• Dynamic charging 11 kW with integrated RCD.
• Automatic power adjustment to prevent overloads.
• IP65 mounting on wall or pole, Type 2 AC connector.

Sigen PV Inverter
Modelos: 50M1, 60M1, 80M1, 100M1, 110M1

Entrada de CC
Energía fotovoltaica máx. CC: 90,000 - 198,000 Wp
Tensión máx. de entrada de CC: 1,100 V
Número de MPPT: 4 - 8 (dependiendo del modelo)
Protección

Función de Protección de Seguridad: Incluye interruptor de circuito de falla de arco, protección contra polaridad inversa en CC, monitorización de corriente residual, protección contra sobretensiones en CC/CA tipo II, protección contra isla, monitorización de aislamiento, y protección contra sobrecorriente/sobretensión/cortocircuito en CA.
Datos generales

Medidas (ancho × alto × prof.): 918 / 640 / 340 mm
Peso: 68 - 75 kg
Rango de temperatura de funcionamiento: -30 ~ 60 °C
Grado de protección IP: IP66
Comunicación: WLAN / Fast Ethernet / RS485 / Sigen CommMod (4G/3G/2G)

Huawei BATERÍA 5kWh

Maximum power output. 2.5kw
Rated voltage (single phase system): 360V
Rated voltage (single phase system): 600V
Cell Technology: Lithium-Ferrophosphate(LiFePO4)
Protection: IP66
10 year warranty

SmartSolar MPPT 250/60-MC4 Controller

Solis Híbrido S6-EH3P10K-H (medidor incluido)

2 MPPT Hybrid Single Phase Inverter
Maximum input voltage: 1000 V
Maximum input current: 16 A / 16 A
Maximum efficiency: 96.5%
DC reverse polarity protection / output over current / short circuit and over voltage
Protection level: IP65
5 year warranty extendable up to 20 years

• ezShade 2.0 solar canopy (2 spaces) in AL6005-T5 aluminum, SUS304 fasteners, certified, wind-resistant up to 50 m/s.
• Integrated drainage with guides and gutters, waterproof.
• Dimensions: 5,500 mm span, 5° tilt, minimum free height 2,100 mm.
• Capacity: up to 15.3 kWp of 510 Wp (3P x 10) or 11.8 kWp of 590 Wp (2P x 10).

• 1% high-accuracy power detection for precise control
• Seamless integration with Sigenergy devices, no setup required
• Top-class 100A direct connection power sensor with built-in CT
• 100ms data refresh rate, instantaneous data feed

Stops power losses
Prevents PID effect
Measure insulation resistance.
IP56
MC4 connection
Output for 2 MPPT, chains up to 1000V with common negative
1 relay output

Sigen Energy Gateway C&I 600 kW

Compatible with up to 30 SigenStor inverters connected in parallel
3 breaker positions reserved for SigenStor or other loads
0 ms switchover to backup mode for uninterrupted energy use
Ready for connection of generator, heat pump, or other controllable loads
350 ms anti-backflow protection for grid and generator
Uninterrupted power supply via PV + ESS / grid / generator

• High density: 12 kWh/module, up to 253 kWh/system
• Safety: IP66, fire suppression, cell thermal control
• Compatible & scalable: CAN integration with Sigenergy inverters, 4‑21 modules
• Fast installation: Ground mount, air cooling, simple commissioning

SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, enabling efficient management of the stored energy. The maximum capacity that can be installed per tower controller is 252 kWh.

The SigenStack cover serves as protection for the battery modules inside the tower. Its main function is to safeguard the modules from external elements such as dust, moisture, and adverse environmental conditions, helping to extend the system's lifespan and maintain installation safety.

• Modular compatibility: Supports up to 5 SigenStack 0.5C modules
• Stackable design: Compact (770 × 195 × 363 mm) and easy to install
• Integrated connectivity: Power and communication interfaces included
• IP66 rating: Dust and water resistant

• 12.5 kW bidirectional: V2X technology to charge the EV and power your home or the grid.
• Ultra-wide range: Full compatibility with EVs (150-1000 V) and CCS2 connector.
• Cooling: Intelligent air cooling.
• IP66 and maintenance-free: Robust outdoor design with remote control via app.

• Sigen EV DC Charger 25 kW: 10 m CCS1, CCS2, and CHAdeMO cable for fast and safe charging.
• Max. stable bidirectional charging of 25  kW.
• Ultra-wide range: Full compatibility with EVs (150-1000 V) and CCS2 connector.
• IP66 protection, maintenance-free.

Features:

160% overload capacity for 2 seconds.
Supports a maximum input current of 20A, making it ideal for all high-power photovoltaic modules of any brand.
Real-time battery monitoring, remote updates, and battery recovery function to extend battery lifespan.
Compatible with peak shaving functions in "self-consumption" and "generator" modes.
Supports unbalanced and half-wave loads on both the grid and backup ports.
Wide battery voltage range compatible with the most common high-voltage lithium batteries on the market.
Battery charge/discharge current of 140A/70A+70A, suitable for the standard 0.5C application with 280Ah cells.
Allows a DC/AC ratio of 200%, maximizing photovoltaic charging and providing extended backup.

Features:

160% overload capacity for 2 seconds.
Supports a maximum input current of 20A, making it ideal for all high-power photovoltaic modules of any brand.
Real-time battery monitoring, remote updates, and battery recovery function to extend battery lifespan.
Compatible with peak shaving functions in "self-consumption" and "generator" modes.
Supports unbalanced and half-wave loads on both the grid and backup ports.
Wide battery voltage range compatible with the most common high-voltage lithium batteries on the market.
Battery charge/discharge current of 140A/70A+70A, suitable for the standard 0.5C application with 280Ah cells.
Allows a DC/AC ratio of 200%, maximizing photovoltaic charging and providing extended backup.

Incluye cable (120cm aprox.) y sistema de conectores MC4 EVO2
Robusto marco de aluminio anodizado
Vidrio solar térmicamente pretensado
Células solares de alta calidad
Versión con 11 busbars