Tu tienda de energía solar

• ezShade 2.0 solar canopy (2 spaces) in AL6005-T5 aluminum, SUS304 fasteners, certified, wind-resistant up to 50 m/s.
• Integrated drainage with guides and gutters, waterproof.
• Dimensions: 5,500 mm span, 5° tilt, minimum free height 2,100 mm.
• Capacity: up to 15.3 kWp of 510 Wp (3P x 10) or 11.8 kWp of 590 Wp (2P x 10).

• 1% high-accuracy power detection for precise control
• Seamless integration with Sigenergy devices, no setup required
• Top-class 100A direct connection power sensor with built-in CT
• 100ms data refresh rate, instantaneous data feed

Stops power losses
Prevents PID effect
Measure insulation resistance.
IP56
MC4 connection
Output for 2 MPPT, chains up to 1000V with common negative
1 relay output

Sigen Energy Gateway C&I 600 kW

Compatible with up to 30 SigenStor inverters connected in parallel
3 breaker positions reserved for SigenStor or other loads
0 ms switchover to backup mode for uninterrupted energy use
Ready for connection of generator, heat pump, or other controllable loads
350 ms anti-backflow protection for grid and generator
Uninterrupted power supply via PV + ESS / grid / generator

• High density: 12 kWh/module, up to 253 kWh/system
• Safety: IP66, fire suppression, cell thermal control
• Compatible & scalable: CAN integration with Sigenergy inverters, 4‑21 modules
• Fast installation: Ground mount, air cooling, simple commissioning

SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, enabling efficient management of the stored energy. The maximum capacity that can be installed per tower controller is 252 kWh.

The SigenStack cover serves as protection for the battery modules inside the tower. Its main function is to safeguard the modules from external elements such as dust, moisture, and adverse environmental conditions, helping to extend the system's lifespan and maintain installation safety.

• Modular compatibility: Supports up to 5 SigenStack 0.5C modules
• Stackable design: Compact (770 × 195 × 363 mm) and easy to install
• Integrated connectivity: Power and communication interfaces included
• IP66 rating: Dust and water resistant

Sigen Gateway HomeMax SP

• 3 breaker positions reserved for SigenStor or other loads
• 0 ms switch to backup mode, worry-free energy usage
• Ready for generator, heat pump or other controllable loads
• Support both whole home backup & partial home backup
• 350 ms reverse power flow protection of grid & generator
• Uninterrupted power supply through PV+ESS/grid/generator

Grid Connection

Type Single phase
Max. AC input current 100

Distribution Panel
Max. AC input current 100

Inverter Connection
Max. no. of connection 3
Max. AC cuicirt breaker 32

Generator/Controllable Load (optional)
Max. AC input/output power 14.5
Max. continuous input/output current 63

• 12.5 kW bidirectional: V2X technology to charge the EV and power your home or the grid.
• Ultra-wide range: Full compatibility with EVs (150-1000 V) and CCS2 connector.
• Cooling: Intelligent air cooling.
• IP66 and maintenance-free: Robust outdoor design with remote control via app.

• Sigen EV DC Charger 25 kW: 10 m CCS1, CCS2, and CHAdeMO cable for fast and safe charging.
• Max. stable bidirectional charging of 25  kW.
• Ultra-wide range: Full compatibility with EVs (150-1000 V) and CCS2 connector.
• IP66 protection, maintenance-free.

Features:

160% overload capacity for 2 seconds.
Supports a maximum input current of 20A, making it ideal for all high-power photovoltaic modules of any brand.
Real-time battery monitoring, remote updates, and battery recovery function to extend battery lifespan.
Compatible with peak shaving functions in "self-consumption" and "generator" modes.
Supports unbalanced and half-wave loads on both the grid and backup ports.
Wide battery voltage range compatible with the most common high-voltage lithium batteries on the market.
Battery charge/discharge current of 140A/70A+70A, suitable for the standard 0.5C application with 280Ah cells.
Allows a DC/AC ratio of 200%, maximizing photovoltaic charging and providing extended backup.

Features:

160% overload capacity for 2 seconds.
Supports a maximum input current of 20A, making it ideal for all high-power photovoltaic modules of any brand.
Real-time battery monitoring, remote updates, and battery recovery function to extend battery lifespan.
Compatible with peak shaving functions in "self-consumption" and "generator" modes.
Supports unbalanced and half-wave loads on both the grid and backup ports.
Wide battery voltage range compatible with the most common high-voltage lithium batteries on the market.
Battery charge/discharge current of 140A/70A+70A, suitable for the standard 0.5C application with 280Ah cells.
Allows a DC/AC ratio of 200%, maximizing photovoltaic charging and providing extended backup.

Incluye cable (120cm aprox.) y sistema de conectores MC4 EVO2
Robusto marco de aluminio anodizado
Vidrio solar térmicamente pretensado
Células solares de alta calidad
Versión con 11 busbars

25 años garantía producto / 30 años de garantía de producción
Fabricante Europeo
2279 x 1134 x 35 mm

Double glass module with TOPCon N-Type technology and 500W power.
MC4-EVO2 connectors and 1400mm cable for vertical and horizontal installation.
Black frame and product warranty 25 years.
Measures 1961 x 1134 x 30 mm.
Pallet: 36 panels
Container: 864 panels

Connector:MC4
EVO2
Cable Length:
-1.40M/+1.40M

• High capacity: Supports up to 9 inverters.
• Storage compatible: Works with SigenStor, generators, and EVs.
• Safety: Reverse flow 350 ms and 0 ms backup.
• Uninterrupted power: Continuous supply via PV + ESS / grid / generator.

Huawei LUNA2000-7-S1 (Módulo de batería)
Requiere el Módulo de control.
Escalabilidad: Se pueden conectar hasta 3 módulos por cada módulo de control, alcanzando un total de 20.7 kWh.
Compatibilidad: Compatible con los inversores residenciales SUN2000 en las siguientes versiones:

SUN2000-2~6KTL-L1
SUN2000-8~10K-LC0
SUN2000-3~10KTL-M1
SUN2000-12~25K-MB0

Expansión del sistema:

Hasta 4 torres de batería por inversor con la gama MB0.
Hasta 3 inversores con batería por instalación.

Requisitos adicionales: Para sistemas con inversores en cascada, se necesita un módulo de comunicación, como el Dongle WLAN-FE, el Dongle 4G o el SmartLogger.
Garantía:

15 años si se registra en el portal FusionSolar.
5 años si no se realiza la monitorización.

Huawei LUNA2000-7- Base y BMS
Permite gestionar de 1 a 3 módulos de batería
Compatible con los inversores residenciales:

SUN2000-2~6KTL-L1
SUN2000-8~10K-LC0
SUN2000-3~10KTL-M1
SUN2000-12~25K-MB0

Escalabilidad:

Hasta cuatro torres de batería por inversor (serie MB0).
Hasta tres inversores con batería por instalación.

Requisitos adicionales:

Contador de energía.
Elemento de comunicación adicional (Dongle WLAN-FE, Dongle 4G o SmartLogger) en sistemas con inversores en cascada.