Tu tienda de energía solar

• Dynamic charging 7 kW with integrated RCD.
• Automatic power adjustment to prevent overloads.
• IP65 mounting on wall or pole, Type 2 AC connector.

HUAWEI Power meter DTSU666-FE smart meter. Only required in combination with the Huawei EV charging point SCharger in installations without PV inverters. Valid for three-phase and single-phase installations up to 100A - 3x CT 100A included.

Including cable (approx. 140 cm) and TS4 connector system
Robust anodized aluminum frame
High quality solar cells
Version with 10 busbars
rated power 510
rated voltage 43.00
current ratet 11.75
power tolerance +5 Wp
plug type MC4EVO2
L*W*H (mm) 2187 * 1102 * 35
short circuit current 12.35
open circuit current 51.90
Maximum system voltage 1500
cell type monocrystalline
Number of cells 150
Weight (kg): 26.50
31 unit per pallet

• 3 breaker positions reserved for SigenStor or other loads.
• Switch to backup mode in 0 ms, uninterrupted energy use.
• Reverse power flow protection of 350 ms from grid or generator.
• Uninterrupted power supply via PV+ESS/grid/generator.

Sigen Gateway HomeMax TP (Three-phase) for 12 inverters

3 breaker positions reserved for SigenStor or other loads
0 ms switchover to backup mode, worry-free energy use
Ready for generator, heat pump, or other controllable loads
Supports whole-home and partial-home backup
350 ms reverse power flow protection from grid and generator
Uninterrupted power supply via PV+ESS/grid/generator

• Dynamic charging 11 kW with integrated RCD.
• Automatic power adjustment to prevent overloads.
• IP65 mounting on wall or pole, Type 2 AC connector.

Huawei BATERÍA 5kWh

Maximum power output. 2.5kw
Rated voltage (single phase system): 360V
Rated voltage (single phase system): 600V
Cell Technology: Lithium-Ferrophosphate(LiFePO4)
Protection: IP66
10 year warranty

• ezShade 2.0 solar canopy (2 spaces) in AL6005-T5 aluminum, SUS304 fasteners, certified, wind-resistant up to 50 m/s.
• Integrated drainage with guides and gutters, waterproof.
• Dimensions: 5,500 mm span, 5° tilt, minimum free height 2,100 mm.
• Capacity: up to 15.3 kWp of 510 Wp (3P x 10) or 11.8 kWp of 590 Wp (2P x 10).

• 1% high-accuracy power detection for precise control
• Seamless integration with Sigenergy devices, no setup required
• Top-class 100A direct connection power sensor with built-in CT
• 100ms data refresh rate, instantaneous data feed

Sigen Energy Gateway C&I 600 kW

Compatible with up to 30 SigenStor inverters connected in parallel
3 breaker positions reserved for SigenStor or other loads
0 ms switchover to backup mode for uninterrupted energy use
Ready for connection of generator, heat pump, or other controllable loads
350 ms anti-backflow protection for grid and generator
Uninterrupted power supply via PV + ESS / grid / generator

• High capacity: Up to 50 kW and 50 inverters.
• Storage compatible: Works with SigenStor, generators, and EVs.
• Safety: Reverse flow 350 ms and 0 ms backup.
• Uninterrupted power: Supply via PV + ESS / grid / generator.

• Nominal AC output power: 100 kW (380/400 V, 50/60 Hz)
• Number of MPPTs: 8 independent inputs
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,3%

• Modular compatibility: Supports up to 5 SigenStack 0.5C modules
• Stackable design: Compact (770 × 195 × 363 mm) and easy to install
• Integrated connectivity: Power and communication interfaces included
• IP66 rating: Dust and water resistant

• Nominal AC output power: 50 kW (400 V, 50 Hz)
• Number of MPPTs: 4 independent inputs (2 strings per MPPT)
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,6%

• Nominal AC output power: 110 kW (380/400 V, 50/60 Hz)
• Number of MPPTs: 8 independent inputs
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,3%

• Nominal AC output power: 80 kW (400 V, 50 Hz)
• Number of MPPTs: 6 independent inputs (2 strings per MPPT)
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,6%

• Nominal AC output power: 60 kW (400 V, 50 Hz)
• Number of MPPTs: 5 independent inputs (2 strings per MPPT)
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,6%

• 12.5 kW bidirectional: V2X technology to charge the EV and power your home or the grid.
• Ultra-wide range: Full compatibility with EVs (150-1000 V) and CCS2 connector.
• Cooling: Intelligent air cooling.
• IP66 and maintenance-free: Robust outdoor design with remote control via app.

Features:

160% overload capacity for 2 seconds.
Supports a maximum input current of 20A, making it ideal for all high-power photovoltaic modules of any brand.
Real-time battery monitoring, remote updates, and battery recovery function to extend battery lifespan.
Compatible with peak shaving functions in "self-consumption" and "generator" modes.
Supports unbalanced and half-wave loads on both the grid and backup ports.
Wide battery voltage range compatible with the most common high-voltage lithium batteries on the market.
Battery charge/discharge current of 140A/70A+70A, suitable for the standard 0.5C application with 280Ah cells.
Allows a DC/AC ratio of 200%, maximizing photovoltaic charging and providing extended backup.

Features:

160% overload capacity for 2 seconds.
Supports a maximum input current of 20A, making it ideal for all high-power photovoltaic modules of any brand.
Real-time battery monitoring, remote updates, and battery recovery function to extend battery lifespan.
Compatible with peak shaving functions in "self-consumption" and "generator" modes.
Supports unbalanced and half-wave loads on both the grid and backup ports.
Wide battery voltage range compatible with the most common high-voltage lithium batteries on the market.
Battery charge/discharge current of 140A/70A+70A, suitable for the standard 0.5C application with 280Ah cells.
Allows a DC/AC ratio of 200%, maximizing photovoltaic charging and providing extended backup.