Tu tienda de energía solar

• Single-phase hybrid inverter 8 kW - 2 MPPT
• Max. input voltage: 600 V
• Max. rated input voltage: 350 V
• Maximum efficiency: 98%
• Protection: IP66

• Single-phase hybrid inverter 10 kW: 2 MPPT.
• Max. input voltage: 600 V.
• Max. nominal input voltage: 350 V.
• Maximum efficiency: 98 %.
• Protection: IP66, dust- and water-resistant.

• 1% high-accuracy power detection for precise control
• Seamless integration with Sigenergy devices, no setup required
• Top-class 100A direct connection power sensor with built-in CT
• 100ms data refresh rate, instantaneous data feed

• Single-phase hybrid inverter 12 kW: 2 MPPT.
• Max. input voltage: 600 V.
• Max. nominal input voltage: 350 V.
• Maximum efficiency: 98 %.
• Protection: IP66, dust- and water-resistant.

Stops power losses
Prevents PID effect
Measure insulation resistance.
IP56
MC4 connection
Output for 2 MPPT, chains up to 1000V with common negative
1 relay output

Sigen Energy Gateway C&I 600 kW

Compatible with up to 30 SigenStor inverters connected in parallel
3 breaker positions reserved for SigenStor or other loads
0 ms switchover to backup mode for uninterrupted energy use
Ready for connection of generator, heat pump, or other controllable loads
350 ms anti-backflow protection for grid and generator
Uninterrupted power supply via PV + ESS / grid / generator

• High capacity: Up to 50 kW and 50 inverters.
• Storage compatible: Works with SigenStor, generators, and EVs.
• Safety: Reverse flow 350 ms and 0 ms backup.
• Uninterrupted power: Supply via PV + ESS / grid / generator.

• Nominal AC output power: 100 kW (380/400 V, 50/60 Hz)
• Number of MPPTs: 8 independent inputs
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,3%

• High density: 12 kWh/module, up to 253 kWh/system
• Safety: IP66, fire suppression, cell thermal control
• Compatible & scalable: CAN integration with Sigenergy inverters, 4‑21 modules
• Fast installation: Ground mount, air cooling, simple commissioning

SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, enabling efficient management of the stored energy. The maximum capacity that can be installed per tower controller is 252 kWh.

The SigenStack cover serves as protection for the battery modules inside the tower. Its main function is to safeguard the modules from external elements such as dust, moisture, and adverse environmental conditions, helping to extend the system's lifespan and maintain installation safety.

• Modular compatibility: Supports up to 5 SigenStack 0.5C modules
• Stackable design: Compact (770 × 195 × 363 mm) and easy to install
• Integrated connectivity: Power and communication interfaces included
• IP66 rating: Dust and water resistant

• Nominal AC output power: 50 kW (400 V, 50 Hz)
• Number of MPPTs: 4 independent inputs (2 strings per MPPT)
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,6%

• Nominal AC output power: 110 kW (380/400 V, 50/60 Hz)
• Number of MPPTs: 8 independent inputs
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,3%

• Nominal AC output power: 80 kW (400 V, 50 Hz)
• Number of MPPTs: 6 independent inputs (2 strings per MPPT)
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,6%

• Nominal AC output power: 60 kW (400 V, 50 Hz)
• Number of MPPTs: 5 independent inputs (2 strings per MPPT)
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,6%

Sigen Gateway HomeMax SP

• 3 breaker positions reserved for SigenStor or other loads
• 0 ms switch to backup mode, worry-free energy usage
• Ready for generator, heat pump or other controllable loads
• Support both whole home backup & partial home backup
• 350 ms reverse power flow protection of grid & generator
• Uninterrupted power supply through PV+ESS/grid/generator

Grid Connection

Type Single phase
Max. AC input current 100

Distribution Panel
Max. AC input current 100

Inverter Connection
Max. no. of connection 3
Max. AC cuicirt breaker 32

Generator/Controllable Load (optional)
Max. AC input/output power 14.5
Max. continuous input/output current 63

• 12.5 kW bidirectional: V2X technology to charge the EV and power your home or the grid.
• Ultra-wide range: Full compatibility with EVs (150-1000 V) and CCS2 connector.
• Cooling: Intelligent air cooling.
• IP66 and maintenance-free: Robust outdoor design with remote control via app.

• Sigen EV DC Charger 25 kW: 10 m CCS1, CCS2, and CHAdeMO cable for fast and safe charging.
• Max. stable bidirectional charging of 25  kW.
• Ultra-wide range: Full compatibility with EVs (150-1000 V) and CCS2 connector.
• IP66 protection, maintenance-free.