Your solar energy shop

Fuse 60A/32V, Victron

Victron Fuse 100A/32V

MIDI-Fuse fuse holder

Phoenix 48/500 VE.Direct IEC inverter

Type 2 arrester input A + B for STP 20000/25000 TL-30 inverters

Up to 15 kWp and up to 5 devices, comes without power supply

Load management device with Solar-Log™.
It has 8 potential-free relay outputs.

Data logger with module temperature and radiation sensors

Open inclined support 30º35º for facade

US2000B Plus Pylontech battery bracket anchor

Solis 110kW 5G trifazat TEN MPPT DC

Solis 125kW 5G trifazic HV ONE MPPT DC

Stick WIFI DLS (compatibil cu întreaga gamă)

MC4 4-6MM² FEEDBACK CONNECTOR
MC4 surface mount connectors form the interface between an inverter or distributor housing and a string.

MC4 bulkhead connector 4-6mm²
MC4 surface mount connectors form the interface between an inverter housing or PV panel.

ET330DINAV53HS1X

Sine wave inverter from the Victron brand, model Phoenix 24/2000 Smart, 24V and 1,600W continuous at 25ºC with output at 230V and 50 Hz.
With built-in Bluetooth connection to be able to monitor and program the equipment very easily.

ELECTRICITY METER SE-WND-3Y-400-MB-K DIN-RAIL

POWER OPTIMIZER P505-P5 (MC4)

Photovoltaic solar production control option

It is 1 sensor to measure the output current of the inverter, or in other words, the generation of the solar installation. In the case of an installation with feed into the grid, the start and stop of charging can be configured based on solar generation, allowing, for example, charging to start at dawn and stop at dusk. When charging from the grid is necessary, for example at night, pressing a button starts charging at full power from the grid, without taking into account solar generation.