Tu tienda de energía solar

The eBick Ultra 175 is Cegasa's answer to installers looking for a pre-installed, self-managing, plug-and-play battery.
It is ideal for replacing lead-acid batteries in existing installations, as well as for new self-consumption and off-grid
off-grid and self-consumption installations with requirements between 13 and 54 KWh.
The eBick Ultra 175, offering an IP30 degree of protection, is stackable up to 2 heights and up to 8 parallel connections in controlled conditions for communication.

The SmartSolar MPPT RS solar charge controllers are Victron's solution for systems with large series-connected PV arrays charging 48 VDC battery banks. This product is perfect for large off-grid and grid-connected battery systems.

This 5.76 kW model features a solar voltage input operating between 80 and 450 VDC, independent tracking inputs, full connectivity, isolated PV connections, display, fully programmable battery charging parameters and active cooling. The new metal housing design and fully enclosed electrical connections enhance safety and modernize the presentation in accordance with Victron's latest product series.

15A MPPT solar charge controller for 12 and 24 volt battery systems and up to 75V photovoltaic field, Victron Energy brand SmartSolar MPPT 75/15 model.

35A MPPT charge controller for battery systems of 12, 24, 36 and 48 volts and up to 150V photovoltaic field, Victron Energy brand SmartSolar MPPT 150/35.

Victron cable used to communicate BMV regulators and battery monitors with victron GX monitoring devices.

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, Victron Energy SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw).

MPPT 60A charge regulator for battery systems of 12, 24, 36 or 48 volts and up to 250V photovoltaic field, Victron Energy brand SmartSolar MPPT 250/60-Tr.

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V PV field, Victron Energy brand SmartSolar MPPT 250/85-MC4 (with solar input connection with 3 pairs of MC4 quick connectors).

Huawei SUN2000-3.68KTL-L1 single-phase inverter, max. 4KVA AC output, storage interface for Huawei HV battery or LGChem, compatible with 4G dongle and SUN2000-450W/600W-P optimizer.

The TCC-CAN control module for Cegasa's eBick Ultra 175 modular battery.
The BMS, through CAN communication, allows sending the most relevant battery data such as SOC, temperature, alarms, current and voltage both in charge and discharge, among others. In addition, with the eViewer App, via Bluetooth connection, it allows to visualize the module parameters such as battery SOC, cycles and bus voltage, among others.

The SmartSolar MPPT RS solar charge controllers are Victron's solution for systems with large series-connected PV arrays charging 48 VDC battery banks. This product is perfect for large off-grid and grid-connected battery systems.

This 11.52 kW model features a solar voltage input operating between 80 and 450 VDC, independent tracking inputs, full connectivity, isolated PV connections, display, fully programmable battery charging parameters and active cooling. The new metal housing design and fully enclosed electrical connections enhance safety and modernize the presentation in accordance with Victron's latest product series.

The Victron Multiplus-II 48V 8000VA 110+100A Inverter provides a perfect solution for hybrid self-consumption systems where we have accumulation in the battery, and expect to fully control the energy we process in the system. MultiPlus-II meets the stringent requirements of national grid topology laws.

Sigen Power Sensor integrates seamlessly with Sigenergy devices, with no configuration required.
This power sensor is part of SigenStor's 5-in-1 energy storage system.
Sigenergy's ESS seamlessly integrates the PV inverter, battery power conversion system (PCS), EV DC charger for electric vehicles, battery pack and energy management system (EMS).

Huawei BATERÍA 5kWh

Maximum power output. 2.5kw
Rated voltage (single phase system): 360V
Rated voltage (single phase system): 600V
Cell Technology: Lithium-Ferrophosphate(LiFePO4)
Protection: IP66
10 year warranty

70A MPPT solar charge controller for battery systems of 12, 24, 36 or 48 volts and up to 250V photovoltaic field, Victron Energy brand SmartSolar MPPT 250/70-Tr VE.Can (with connection for solar input with screw).

70A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V PV field, Victron Energy SmartSolar MPPT 250/70-MC4 model.
The VE.Can communications system allows connecting and synchronizing multiple controllers (up to 25 controllers) in an installation.

10A MPPT solar charge controller for 12 and 24 volt battery systems and up to 75V photovoltaic field, Victron Energy brand SmartSolar MPPT 75/10.

SigenStack Battery Controller M1 - 0.5C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, enabling efficient management of the stored energy. The maximum capacity that can be installed per tower controller is 252 kWh.

The SigenStack cover serves as protection for the battery modules inside the tower. Its main function is to safeguard the modules from external elements such as dust, moisture, and adverse environmental conditions, helping to extend the system's lifespan and maintain installation safety.