Tu tienda de energía solar

Sigen PV Inverter
Modelos: 50M1, 60M1, 80M1, 100M1, 110M1

Entrada de CC
Energía fotovoltaica máx. CC: 90,000 - 198,000 Wp
Tensión máx. de entrada de CC: 1,100 V
Número de MPPT: 4 - 8 (dependiendo del modelo)
Protección

Función de Protección de Seguridad: Incluye interruptor de circuito de falla de arco, protección contra polaridad inversa en CC, monitorización de corriente residual, protección contra sobretensiones en CC/CA tipo II, protección contra isla, monitorización de aislamiento, y protección contra sobrecorriente/sobretensión/cortocircuito en CA.
Datos generales

Medidas (ancho × alto × prof.): 918 / 640 / 340 mm
Peso: 68 - 75 kg
Rango de temperatura de funcionamiento: -30 ~ 60 °C
Grado de protección IP: IP66
Comunicación: WLAN / Fast Ethernet / RS485 / Sigen CommMod (4G/3G/2G)

Backup Box-B0 Huawei

Rated voltage: 220V / 230V
AC output voltage range: 198V - 253V
Maximum output current: 22.7
Protection: IP65

25 años garantía producto / 30 años de garantía de producción
Fabricante Europeo
1910 x 1134 x 35 mm

Huawei BATERÍA 5kWh

Maximum power output. 2.5kw
Rated voltage (single phase system): 360V
Rated voltage (single phase system): 600V
Cell Technology: Lithium-Ferrophosphate(LiFePO4)
Protection: IP66
10 year warranty

Solis Híbrido S6-EH3P10K-H (medidor incluido)

2 MPPT Hybrid Single Phase Inverter
Maximum input voltage: 1000 V
Maximum input current: 16 A / 16 A
Maximum efficiency: 96.5%
DC reverse polarity protection / output over current / short circuit and over voltage
Protection level: IP65
5 year warranty extendable up to 20 years

• ezShade 2.0 solar canopy (2 spaces) in AL6005-T5 aluminum, SUS304 fasteners, certified, wind-resistant up to 50 m/s.
• Integrated drainage with guides and gutters, waterproof.
• Dimensions: 5,500 mm span, 5° tilt, minimum free height 2,100 mm.
• Capacity: up to 15.3 kWp of 510 Wp (3P x 10) or 11.8 kWp of 590 Wp (2P x 10).

• Single-phase hybrid inverter 8 kW - 2 MPPT
• Max. input voltage: 600 V
• Max. rated input voltage: 350 V
• Maximum efficiency: 98%
• Protection: IP66

• Single-phase hybrid inverter 10 kW: 2 MPPT.
• Max. input voltage: 600 V.
• Max. nominal input voltage: 350 V.
• Maximum efficiency: 98 %.
• Protection: IP66, dust- and water-resistant.

• 1% high-accuracy power detection for precise control
• Seamless integration with Sigenergy devices, no setup required
• Top-class 100A direct connection power sensor with built-in CT
• 100ms data refresh rate, instantaneous data feed

• Single-phase hybrid inverter 12 kW: 2 MPPT.
• Max. input voltage: 600 V.
• Max. nominal input voltage: 350 V.
• Maximum efficiency: 98 %.
• Protection: IP66, dust- and water-resistant.

Stops power losses
Prevents PID effect
Measure insulation resistance.
IP56
MC4 connection
Output for 2 MPPT, chains up to 1000V with common negative
1 relay output

Sigen Energy Gateway C&I 600 kW

Compatible with up to 30 SigenStor inverters connected in parallel
3 breaker positions reserved for SigenStor or other loads
0 ms switchover to backup mode for uninterrupted energy use
Ready for connection of generator, heat pump, or other controllable loads
350 ms anti-backflow protection for grid and generator
Uninterrupted power supply via PV + ESS / grid / generator

• High capacity: Up to 50 kW and 50 inverters.
• Storage compatible: Works with SigenStor, generators, and EVs.
• Safety: Reverse flow 350 ms and 0 ms backup.
• Uninterrupted power: Supply via PV + ESS / grid / generator.

• Nominal AC output power: 100 kW (380/400 V, 50/60 Hz)
• Number of MPPTs: 8 independent inputs
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,3%

• High density: 12 kWh/module, up to 253 kWh/system
• Safety: IP66, fire suppression, cell thermal control
• Compatible & scalable: CAN integration with Sigenergy inverters, 4‑21 modules
• Fast installation: Ground mount, air cooling, simple commissioning

• Modular compatibility: Supports up to 5 SigenStack 0.5C modules
• Stackable design: Compact (770 × 195 × 363 mm) and easy to install
• Integrated connectivity: Power and communication interfaces included
• IP66 rating: Dust and water resistant

• Nominal AC output power: 50 kW (400 V, 50 Hz)
• Number of MPPTs: 4 independent inputs (2 strings per MPPT)
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,6%

• Nominal AC output power: 110 kW (380/400 V, 50/60 Hz)
• Number of MPPTs: 8 independent inputs
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,3%

• Nominal AC output power: 80 kW (400 V, 50 Hz)
• Number of MPPTs: 6 independent inputs (2 strings per MPPT)
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,6%

• Nominal AC output power: 60 kW (400 V, 50 Hz)
• Number of MPPTs: 5 independent inputs (2 strings per MPPT)
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98,6%