Tu tienda de energía solar fotovoltaica

A power meter transmits the measured amount of power to the SolarLog for analysis. It serves as a consumption meter, showing a comparison of produced and consumed power. It can be configured to operate with the SolarLog in three different modes:
- Measuring energy consumption for optimal utilization of the power generated.
- Measuring the total amount of energy that has been fed into the grid.
- Measuring the energy production of inverters that are not directly managed by SolarLog.

Energy Meter single-phase 100 A maximum.
The Energy Meter can be used for these things:
1. grid meter, and used as a control input for an ESS System (1).
2. Measuring the output of a photovoltaic inverter.
3. Measuring the output of an AC generator set.
The meter is connected to the Color Control GX. There are two options for its wiring:
1. direct connection, using the RS485 to USB interface with a 1.8 m long cable, or the 5.0 m long cable.
2. Wireless connection via Zigbee

The Victron EM24 Ethernet is a standard device for measuring the power and energy of a three-phase application, for example in the distribution box or for measuring the output of a PV inverter, an AC generator or an inverter or inverter/charger.

Terminal cobre T6/6

Kit de protección sobretensión de CC (Tipo I/II)

AC Overvoltage Protection Kit (Type I/II))

Módulo de datos Speedwire como equipamiento adicional para SI 8.0H/6.0H en aplicaciones On-Grid

Interfaz Webconnect para inversores Sunny Tripower TL30 y Sunny Boy TL21

8 entradas digitales, 8 salidas digitales, 4 entradas analógicas, 4 salidas analógicas, 4 entradas de temperatura. Compatible con ennexOS. Para Datamanager M

4 entradas analógicas, 4 entradas digitales, 4 salidas digitales. Compatible con sistemas ennexOS. Para Datamanager M

Pasarela de comunicación para integrar plantas existentes con cableado RS485 en sistemas de control y monitorización con Speedwire y Cluster Controller

Control center and energy manager via Ethernet, including Energy Meter.

Equipos para monitorización y control de hasta 50 dispositivos SMA

Interfaz para conectar productos Victron al ordenador.

VE.Can to CAN-bus BMS type B Cable 1.8m

Terminal cobre T10/8

P nominal: 4600 W salida: 230V AC / 50 Hz, 48V. IP 54. Speedwire y Webconnect integrado.

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, Victron Energy SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw).

MPPT 60A charge regulator for battery systems of 12, 24, 36 or 48 volts and up to 250V photovoltaic field, Victron Energy brand SmartSolar MPPT 250/60-Tr.