Tu tienda de energía solar

A power meter transmits the measured amount of power to the SolarLog for analysis. It serves as a consumption meter, showing a comparison of produced and consumed power. It can be configured to operate with the SolarLog in three different modes:
- Measuring energy consumption for optimal utilization of the power generated.
- Measuring the total amount of energy that has been fed into the grid.
- Measuring the energy production of inverters that are not directly managed by SolarLog.

Energy Meter single-phase 100 A maximum.
The Energy Meter can be used for these things:
1. grid meter, and used as a control input for an ESS System (1).
2. Measuring the output of a photovoltaic inverter.
3. Measuring the output of an AC generator set.
The meter is connected to the Color Control GX. There are two options for its wiring:
1. direct connection, using the RS485 to USB interface with a 1.8 m long cable, or the 5.0 m long cable.
2. Wireless connection via Zigbee

The Victron EM24 Ethernet is a standard device for measuring the power and energy of a three-phase application, for example in the distribution box or for measuring the output of a PV inverter, an AC generator or an inverter or inverter/charger.

Control center and energy manager via Ethernet, including Energy Meter.

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, Victron Energy SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw).

MPPT 60A charge regulator for battery systems of 12, 24, 36 or 48 volts and up to 250V photovoltaic field, Victron Energy brand SmartSolar MPPT 250/60-Tr.

Charge Controller Victron Energy SmartSolar MPPT 150/60

The Victron UTP RJ45 Cable 1.8m is a cable for connecting the Phoenix Inverter Control, the VE Interface MK3-USB and the VE.Bus connections between multiple VE.Bus and GX devices.

Fuse Mega. Pack 5 pcs.

Fusible Mega.

MEGA Fuse 125A/58V

For simple single-parallel or series-parallel connection of photovoltaic modules.

8kw three-phase inverter (2 MPPT) "transformerless"

Integrated WLAN or Ethernet connection.

Max input voltage: 1000V
Maximum input current: 16A
IP65 protection
Maximum performance:98%
Warranty: 2 years

Energy meters are typically used in an energy storage system, to measure the power and energy of the entire application in the distribution box and minimize the import or export of energy to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM gateway.
ET340 (RS485 - for 3-phase max. 65 A)

Three-phase bidirectional meter.
Nominal voltage 230 V/400 V
Frequency 50 Hz/±5 %.
Nominal/limit current per phase conductor 5 A/63 A (>63 A combined with external current transformers)
Starting current <25 mA
Connection cross-section From 10 mm² to 16 mm² 1) (for 63 A protection)

El Color Control GX es el centro de comunicaciones de su instalación. Ofrece información en tiempo real de un vistazo y le permite controlar todos los productos conectados a él. Podrá controlar todo el sistema - desde prácticamente cualquier parte del mundo - accediendo a su Color Control GX mediante nuestro Portal Victron Remote Management (VRM), de uso gratuito.

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V PV field, Victron Energy brand SmartSolar MPPT 250/85-MC4 (with solar input connection with 3 pairs of MC4 quick connectors).

3000VA 48V 230V IP22 (Incluye cargador 35A y dispositivo GX con pantalla)

Charge controller Victron SmartSolar MPPT 150/100 Tr Ve.can