Tu tienda de energía solar

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V photovoltaic field, Victron Energy SmartSolar MPPT 250/85-Tr VE.Can (with connection for solar input with screw).

MPPT 60A charge regulator for battery systems of 12, 24, 36 or 48 volts and up to 250V photovoltaic field, Victron Energy brand SmartSolar MPPT 250/60-Tr.

Charge Controller Victron Energy SmartSolar MPPT 150/60

8kw three-phase inverter (2 MPPT) "transformerless"

Integrated WLAN or Ethernet connection.

Max input voltage: 1000V
Maximum input current: 16A
IP65 protection
Maximum performance:98%
Warranty: 2 years

Energy meters are typically used in an energy storage system, to measure the power and energy of the entire application in the distribution box and minimize the import or export of energy to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM gateway.
ET340 (RS485 - for 3-phase max. 65 A)

Three-phase bidirectional meter.
Nominal voltage 230 V/400 V
Frequency 50 Hz/±5 %.
Nominal/limit current per phase conductor 5 A/63 A (>63 A combined with external current transformers)
Starting current <25 mA
Connection cross-section From 10 mm² to 16 mm² 1) (for 63 A protection)

85A MPPT solar charge controller for 12, 24, 36 or 48 volt battery systems and up to 250V PV field, Victron Energy brand SmartSolar MPPT 250/85-MC4 (with solar input connection with 3 pairs of MC4 quick connectors).

20Kw three-phase inverter (2 MPPT) "without transformer"

They do not have the WLAN communication module installed, so the inverter data cannot be monitored over the Internet

Maximum input current: 27A
Maximum input voltage: 1000V
IP66 protection
Efficiency 98.1%
2 years warranty

Smart Meter TS 65A-3; for recording energy consumption, three-phase, direct metering

Three-phase inverter of 15 Kw (2 MPPT) "without transformer"

They do not have the WLAN communication module installed, so the inverter data cannot be monitored over the Internet

Maximum input current: 33A/27A (MPPT1/MPPT2)
Maximum input voltage: 1000V
IP66 protection
Efficiency 98.1%
2 years warranty

Registrador de datos con sensores de temepratura del módulo y radiación

Device for load management with Solar-Log™.
It has 8 potential-free relay outputs.

Modbus 3-phase current meter

Huawei 8KTL-M1 HC

Smart Dongle - WLAN-FE Included
Maximum input voltage: 1,100 V
Maximum input current per MPPT: 13.5A
DC reverse polarity / AC overcurrent / short circuit protection, anti-islanding
Protection: IP65
Maximum efficiency: 98.6%
10 year warranty

Huawei 10KTL-M1 HC

Maximum input voltage: 1100V
Maximum input current per MPPT: 11 A
DC reverse polarity / AC overcurrent / short circuit protection, anti-islanding
Smart Dongle - WLAN-FE Included
Protection: IP65
Maximum efficiency: 98.6%
10 year warranty

Modular electric energy meter that displays power (kWh, kVArh and kVA) and other measurements directly on its backlit LCD display.
It is designed for three-phase load metering with connection via CT and is suitable for applications up to 12000 A.

Huawei Smart Power Sensor DTSU666-H (3-Ph).
Valid if cable section doesn't exceeds 95 mm2 and there's not a higher intensity of 250 A.

Huawei 5KTL-M1 HC

Smart Dongle - WLAN-FE Included
Maximum input voltage: 1,100 V
Maximum input current per MPPT: 13.5A
DC reverse polarity / AC overcurrent / short circuit protection, anti-islanding
Protection: IP65
Maximum efficiency: 98.4%
10 year warranty

Huawei DDSU666-H (1-Ph)

Indirect measurement wattmeter (ampere clamp included)
It allows measuring the consumption of our electrical network.
With an RS485 communication interface to communicate with Huawei inverters
3 years warranty.

Tensión 48 V (45….53,5 Vdc)
Potencia disponible 90% (3,2kW)
Descarga recomendada 37 A (1,7 kW)
Descarga máxima 74 A (3,5 kW)
Conexión Can-Bus y RS485
Compatible con Victron y Solis
> 6000 ciclos de vida @ 25ºC (15 años)
Dimensiones: 442mm x 420mm x 132mm
Peso: 32 kg.