Tu tienda de energía solar

Photovoltaic protection panel for 2 inputs + 2 outputs. 1000Vdc, 15A per input, with fuse and fuse base. Enclosure of 12 modules in ABS. MC4 connectors.

FR 01V2 kit (2 modules) black

Three-phase junction adaptor

Regulation and monitoring of photovoltaic systems. For installations up to 2000 kWp.

Openable toroidal IAP 1000/5

Solarbloc 4V18 Kit (4 modules) 35mm

FR 01V3 kit (3 modules) black

Coplanar kit for 6 vertically installed modules of 60 and 72 cells, with a frame between 30 and 42 mm.

The kit includes:

Light Guide 2.40 m
OneEnd final plate set
OneMid center plate set
Protection cap for Light guide
Self-tapping rod set M10x250

Coplanar kit for 5 vertically installed modules of 60 and 72 cells, with a frame between 30 and 42 mm.

The kit includes:

Light Guide 2.40 m and Light Guide 3.30 m.
OneEnd final plate set
OneMid center plate set
Protection cap for Light guide
Self-tapping rod set M10x250

FR Safety guard Adjustable at two angles (without screws)

FR 01V5 kit (5 modules) black

• Three-phase power: 10 kW hybrid inverter for residential and commercial use
• Total integration: Combines solar energy, batteries, grid and generator in a single device
• Immediate backup: 0 ms instant changeover for critical loads
• Robust design: Compact, silent and resistant with IP66 protection for outdoors

SigenStack Battery Controller M1 - 1C
This is the main controller for the battery modules in the SigenStack series. Its function is to regulate and optimize the performance of the energy storage system in each tower, allowing efficient management of the stored energy. The maximum capacity that can be installed on each tower controller is 252 kWh.

• SigenStack Tower Master Controller – coordinates and manages all battery modules
• Optimizes charging, discharging and balance between modules for efficiency and useful life
• Maximum capacity managed per tower: 252kWh

• Rated AC output power: 100 kW (380/400 V, 50/60 Hz)
• Number of MPPT: 8 independent inputs
• MPPT input voltage range: 160–1000 V
• Maximum efficiency: 98.3%

Atmoce MW-025210-B0 cable (21m)

Voltage 48 V (45….53.5 Vdc)
Available power 90% (3.2kW)
Recommended discharge 37 A (1.7 kW)
Maximum discharge 74 A (3.5 kW)
Can-Bus and RS485 connection
Compatible with Victron and Solis
> 6000 life cycles @ 25ºC (15 years)
Dimensions: 442mm x 420mm x 132mm
Weight: 32kg.

Atmoce MR100-S (1-Phase Relay)

RENLOGGER-C For data management and exploitation
Complementary communications system, with direct integration with all Real Energy System products. The RENLOGGER allows us direct communication with the deepest programming levels of the various PLCs in the PRISMA range. It integrates 1 Ethernet port, 3 USB ports and 1 USBC port in the same device. The RENLOGGER is a computer specifically prepared to serve as a support system for automata. The final objective is to serve as a bidirectional communication gateway with the automaton chip itself.
Features Multifunction device with the ability to: - Manage multiple devices in real time. - Double TCP/IP communication. - Router server - DHCP communications via Wifi and Lan - Direct routing to VPN - Wifi configurable as client or AP. - Fanless. - Preconfigured for scheduling communications. - Adjusted according to the characteristics of the automaton to be complemented. - Applicable to all types of installations. - Provides: Modbus/TCP Server for monitoring. - Possibility of connecting screen and keyboard The communication capabilities allow virtually the control of any device (*) with communication capacity that has the ports enabled. Includes the software and accessories necessary for installation.

Solarbloc kit for 1 module horizontally at 18º