Supports WiFi and LAN communication
- Plug and play, quick installation
- Fault alarm, real time monitoring
- Status indicator, easy to display the working status
- RESET button, one key to send data, convenient debugging
- Support Bluetooth close connection and debugging
- One-key inverter address assignment,
efficient and labor-saving

For simple single-parallel or series-parallel connection of photovoltaic modules.

For simple single-parallel or series-parallel connection of photovoltaic modules.

Pletina final

Compatible con Victron y Huawei L1

medida Indirecta.

The Victron EM24 Ethernet is a standard device for measuring the power and energy of a three-phase application, for example in the distribution box or for measuring the output of a PV inverter, an AC generator or an inverter or inverter/charger.

Three-phase bidirectional meter.
Nominal voltage 230 V/400 V
Frequency 50 Hz/±5 %.
Nominal/limit current per phase conductor 5 A/63 A (>63 A combined with external current transformers)
Starting current <25 mA
Connection cross-section From 10 mm² to 16 mm² 1) (for 63 A protection)

Energy Meter single-phase 100 A maximum.
The Energy Meter can be used for these things:
1. grid meter, and used as a control input for an ESS System (1).
2. Measuring the output of a photovoltaic inverter.
3. Measuring the output of an AC generator set.
The meter is connected to the Color Control GX. There are two options for its wiring:
1. direct connection, using the RS485 to USB interface with a 1.8 m long cable, or the 5.0 m long cable.
2. Wireless connection via Zigbee

Energy meters are typically used in an energy storage system, to measure the power and energy of the entire application in the distribution box and minimize the import or export of energy to the grid. They can also be used to measure the output of a PV inverter or AC loads and display the data on GX devices such as the Cerbo GX or Ekrano GX and the VRM gateway.
ET340 (RS485 - for 3-phase max. 65 A)

Sensor de temperatura y humedad con salida digital RS485 Modbus.
Temperatura de precisión ± 0,1 °C. Humedad de precisión ± 1,5% HR.
Completo con 6 placas de protección solar en resina blanca anti-amarilleo,
diámetro 80 mm, soporte de fijación en acero blanco. M8 4 pines macho
conector 1 sensor con parasoles y soporte

3000VA 24V 230V IP21 (Incluye cargador 70A y color control)

Plazo de entrega un mes desde confirmación.
Fabricación Española